Slackware IDE bootdisks ----------------------- This directory contains a collection of batch files used to create Slackware bootdisks. To create a disk, just put a formatted floppy disk in your drive and choose one of the options listed below to make the disk. Read all of the choices carefully to pick the disk that best matches the hardware in your machine. NOTE: Using the VIEW program to create the Slackware bootdisks will not work under Windows95. If you're running Windows95, you'll need to restart your machine in MS-DOS mode before you can create a bootdisk. NOTE: All of these disks contain support for IDE hard drives and CDROM drives. If you have additional equipment, look for the disk that supports it. Name Additional driver support ---- ------------------------- aztech.bat CD-ROM drives: Aztech CDA268-01A, Orchid CD-3110, Okano/Wearnes CDD110, Conrad TXC, CyCDROM CR520, CR540. bare.bat (none, just IDE support) bareapm.bat Like the BARE disk, but with APM (Advanced Power Management) support. barepnp.bat Like the BARE disk, but with experimental Plug'n'Play BIOS extensions. cdu31a.bat Sony CDU31/33a CD-ROM. cdu535.bat Sony CDU531/535 CD-ROM. cm206.bat Philips/LMS cm206 CD-ROM with cm260 adapter card. goldstar.bat Goldstar R420 CD-ROM (sometimes sold in a 'Reveal Multimedia Kit'). mcd.bat NON-IDE Mitsumi CD-ROM support. mcdx.bat Improved NON-IDE Mitsumi CD-ROM support. net.bat Ethernet support. (Used for installing over the network) optics.bat Optics Storage 8000 AT CD-ROM (the 'DOLPHIN' drive). sanyo.bat Sanyo CDR-H94A CD-ROM support. sbpcd.bat Matsushita, Kotobuki, Panasonic, CreativeLabs (Sound Blaster), Longshine and Teac NON-IDE CD-ROM support. xt.bat MFM hard drive support.