SENDMAIL RELEASE NOTES @(#)RELEASE_NOTES 8.6.9.2 (Berkeley) 4/19/94 This listing shows the version of the sendmail binary, the version of the sendmail configuration files, the date of release, and a summary of the changes in that release. 8.6.9/8.6.9 94/04/19 Do all mail delivery completely disconnected from any terminal. This provides consistency with daemon delivery and may have some security implications. Make sure that malloc doesn't get called with zero size, since that fails on some systems. Reported by Ed Hill of the University of Iowa. Fix multi-line values for $e (SMTP greeting message). Reported by Mike O'Connor of Ford Motor Company. Avoid syserr if no NIS domain name is defined, but the map it is trying to open is optional. From Win Bent of USC. Changes for picky compilers from Ed Gould of Digital Equipment. Hesiod support for UDB from Todd Miller of the University of Colorado. Use "hesiod" as the service name in the U option. Fix a problem that failed to set the "authentic" host name (that is, the one derived from the socket info) if you called sendmail -bs from inetd. Based on code contributed by Todd Miller (this problem was also reported by Guy Helmer of Dakota State University). This also fixes a related problem reported by Liudvikas Bukys of Rochester University. Parameterize "nroff -h" in all the Makefiles so people with variant versions can use them easily. Suggested by Peter Collinson of Hillside Systems. SMTP "MAIL" commands with multiple ESMTP parameters required two spaces between parameters instead of one. Reported by Valdis Kletnieks of Virginia Tech. Reduce the number of system calls during message collection by using global timeouts around the collect() loop. This code was contributed by Eric Wassenaar. If the initial hostname name gathering results in a name without a dot (usually caused by NIS misconfiguration) and BIND is compiled in, directly access DNS to get the canonical name. This should make life easier for Solaris systems. If it still can't be resolved, and if the name server is listed as "required", try again in 30 seconds. If that also fails, exit immediately to avoid bogus "config error: mail loops back to myself" messages. Improve the "MAIL DELETED BECAUSE OF LACK OF DISK SPACE" error message to explain how much space was available and sound a bit less threatening. Suggested by Stan Janet of the National Institute of Standards and Technology. If mail is delivered to an alias that has an owner, deliver any requested return-receipt immediately, and strip the Return-Receipt-To: header from the subsequent message. This prevents a certain class of denial of service attack, arguably gives more reasonable semantics, and moves things more towards what will probably become a network standard. Suggested by Christopher Davis of Kapor Enterprises. Add a "noreceipts" privacy flag to turn off all return receipts without recompiling. Avoid printing ESMTP parameters as part of the error message if there are errors during parsing. This change is purely cosmetic. Avoid sending out error messages during the collect phase of SMTP; there is an MVS mailer from UCLA that gets confused by this. Of course, I think it's their bug.... Check for the $j macro getting undefined, losing a dot, or getting lost from $=w in the daemon before accepting a connection; if it is, it dumps state, prints a LOG_ALERT message, and drops core for debugging. This is an attempt to track down a bug that I thought was long since gone. If you see this, please forward the log fragment to sendmail@CS.Berkeley.EDU. Change OLD_NEWDB from a #ifdef to a #if so it can be turned off with -DOLD_NEWDB=0 on the command line. From Christophe Wolfhugel. Instead of trying to truncate the listen queue for the server SMTP port when the load average is too high, just close the port completely and reopen it later as needed. This ensures that the other end gets a quick "connection refused" response, and that the connection can be recovered later. In particular, some socket emulations seem to get confused if you tweak the listen queue size around and can never start listening to connections again. The down side is that someone could start up another daemon process in the interim, so you could have multiple daemons all not listening to connections; this could in turn cause the sendmail.pid file to be incorrect. A better approach might be to accept the connection and give a 421 code, but that could break other mailers in mysterious ways and have paging behaviour implications. Fix a glitch in TCP-level debugging that caused flag 16.101 to set debugging on the wrong socket. From Eric Wassenaar. When creating a df* temporary file, be sure you truncate any existing data in the file -- otherwise system crashes and the like could result in extra data being sent. DOC: Replace the CHANGES-R5-R8 readme file with a paper in the doc directory. This includes some additional information. CONFIG: change UUCP rules to never add $U! or $k! on the front of recipient envelope addresses. This should have been handled by the $&h trick, but broke if people were mixing domainized and UUCP addresses. They should probably have converted all the way over to uucp-uudom instead of uucp-{new,old}, but the failure mode was to loop the mail, which was bad news. Portability fixes: Newer BSDI systems (several people). Older BSDI systems from Christophe Wolfhugel. Intergraph CLIX, from Paul Southworth of CICNet. UnixWare, from Evan Champion. NetBSD from Adam Glass. Solaris from Quentin Campbell of the University of Newcastle upon Tyne. IRIX from Dean Cookson and Bill Driscoll of Mitre Corporation. NCR 3000 from Kevin Darcy of Chrysler Corporation. SunOS (it has setsid() and setvbuf() calls) from Jonathan Kamens of OpenVision Technologies. HP-UX from Tor Lillqvist. New Files: src/Makefile.CLIX src/Makefile.NCR3000 doc/changes/Makefile doc/changes/changes.me doc/changes/changes.ps 8.6.8/8.6.6 94/03/21 SECURITY: it was possible to read any file as root using the E (error message) option. Reported by Richard Jones; fixed by Michael Corrigan and Christophe Wolfhugel. 8.6.7/8.6.6 94/03/14 SECURITY: it was possible to get root access by using wierd values to the -d flag. Thanks to Alain Durand of INRIA for forwarding me the notice from the bugtraq list. 8.6.6/8.6.6 94/03/13 SECURITY: the ability to give files away on System V-based systems proved dangerous -- don't run as the owner of a :include: file on a system that allows giveaways. Unfortunately, this also applies to determining a valid shell. IMPORTANT: Previous versions weren't expiring old connections in the connection cache for a long time under some circumstances. This could result in resource exhaustion, both at your end and at the other end. This checks the connections for timeouts much more frequently. From Doug Anderson of NCSC. Fix a glitch that snuck in that caused programs to be run as the sender instead of the recipient if the mail was from a local user to another local user. From Motonori Nakamura of Kyoto University. Fix "wildcard" on /etc/shell matching -- instead of looking for "*", look for "/SENDMAIL/ANY/SHELL/". From Bryan Costales of ICSI. Change the method used to declare the "statfs" availability; instead of HASSTATFS and/or HASUSTAT with a ton of tweaking in conf.c, there is a single #define called SFS_TYPE which takes on one of six values (SFS_NONE for no statfs availability, SFS_USTAT for the ustat(2) syscall, SFS_4ARGS for a four argument statfs(2) call, and SFS_VFS, SFS_MOUNT, or SFS_STATFS for a two argument statfs(2) call with the declarations in , , or respectively). Fix glitch in NetInfo support that could return garbage if there was no "/locations/sendmail" property. From David Meyer of the University of Virginia. Change HASFLOCK from defined/not-defined to a 0/1 definition to allow Linux to turn it off even though it is a BSD-like system. Allow setting of "ident" timeout to zero to turn off the ident protocol entirely. Make 7-bit stripping local to a connection (instead of to a mailer); this allows you to specify that SMTP is a 7-bit channel, but revert to 8-bit should it advertise that it supports 8BITMIME. You still have to specify mailer flag 7 to get this stripping at all. Improve makesendmail script so it handles more cases automatically. Tighten up restrictions on taking ownership of :include: files to avoid problems on systems that allow you to give away files. Fix a problem that made it impossible to rebuild the alias file if it was on a read-only file system. From Harry Edmon of the University of Washington. Improve MX randomization function. From John Gardiner Myers of CMU. Fix a minor glitch causing a bogus message to be printed (used %s instead of %d in a printf string for the line number) when a bad queue file was read. From Harry Edmon. Allow $s to remain NULL on locally generated mail. I'm not sure this is necessary, but a lot of people have complained about it, and there is a legitimate question as to whether "localhost" is legal as an 822-style domain. Fix a problem with very short line lengths (mailer L= flag) in headers. This causes a leading space to be added onto continuation lines (including in the body!), and also tries to wrap headers containing addresses (From:, To:, etc) intelligently at the shorter line lengths. Problem Reported by Lars-Johan Liman of SUNET Operations Center. Log the real user name when logging syserrs, since these can have security implications. Suggested by several people. Fix address logging of cached connections -- it used to always log the numeric address as zero. This is a somewhat bogus implementation in that it does an extra system call, but it should be an inexpensive one. Fix from Motonori Nakamura. Tighten up handling of short syslog buffers even more -- there were cases where the outgoing relay= name was too long to share a line with delay= and mailer= logging. Limit the overhead on split envelopes to one open file descriptor per envelope -- previously the overhead was three descriptors. This was in response to a problem reported by P{r (Pell) Emanuelsson. Fixes to better handle the case of unexpected connection closes; this redirects the output to the transcript so the info is not lost. From Eric Wassenaar. Fix potential string overrun if you macro evaluate a string that has a naked $ at the end. Problem noted by James Matheson . Make default error number on $#error messages 553 (``Requested action not taken: mailbox name not allowed'') instead of 501 (``Syntax error in parameters or arguments'') to avoid bogus "protocol error" messages. Strip off any existing trailing dot on names during $[ ... $] lookup. This prevents it from ending up with two dots on the end of dot terminated names. From Wesley Craig of the University of Michigan and Bryan Costales of ICSI. Clean up file class reading so that the debugging information is more informative. It hadn't been using setclass, so you didn't see the class items being added. Avoid core dump if you are running a version of sendmail where NIS is compiled in, and you specify an NIS map, but NIS is not running. Fix from John Oleynick of Rutgers. Diagnose bizarre case where res_search returns a failure value, but sets h_errno to a success value. Make sure that "too many hops" messages are considered important enough to send an error to the Postmaster (that is, the address specified in the P option). This fix should help problems that cause the df file to be left around sometimes -- unfortunately, I can't seem to reproduce the problem myself. Avoid core dump (null pointer reference) on EXPN command; this only occurred if your log level was set to 10 or higher and the target account was an alias or had a .forward file. Problem noted by Janne Himanka. Avoid "denial of service" attacks by someone who is flooding your SMTP port with bad commands by shutting the connection after 25 bad commands are issued. From Kyle Jones of UUNET. Fix core dump on error messages with very long "to" buffers; fmtmsg overflows the message buffer. Fixed by trimming the to address to 203 characters. Problem reported by John Oleynick. Fix configuration for HASFLOCK -- there were some spots where a #ifndef was incorrectly #ifdef. Pointed out by George Baltz of the University of Maryland. Fix a typo in savemail() that could cause the error message To: lists to be incorrect in some places. From Motonori Nakamura. Fix a glitch that can cause duplicate error messages on split envelopes where an address on one of the lists has a name server failure. Fix from Voradesh Yenbut of the University of Washington. Fix possible bogus pointer reference on ESMTP parameters that don't have an ``=value'' part. CNAME loops caused an error message to be generated, but also re-queued the message. Changed to just re-queue the message (it's really hard to just bounce it because of the wierd way the name server works in the presence of CNAME loops). Problem noted by James M.R.Matheson of Cambridge University. Avoid giving ``warning: foo owned process doing -bs'' messages if they use ``MAIL FROM:'' where foo is their true user name. Suggested by Andreas Stolcke of ICSI. Change the NAMED_BIND compile flag to be a 0/1 flag so you can override it easily in the Makefile -- that is, you can turn it off using -DNAMED_BIND=0. If a gethostbyname(...) of an address with a trailing dot fails, try it without the trailing dot. This is because if you have a version of gethostbyname() that falls back to NIS or the /etc/hosts file it will fail to find perfectly reasonable names that just don't happen to be dot terminated in the hosts file. You don't want to strip the dot first though because we're trying to ensure that country names that match one of your subdomains get a chance. PRALIASES: fix bogus output on non-null-terminated strings. From Bill Gianopoulos of Raytheon. CONFIG: Avoid rewriting anything that matches $w to be $j. This was in code intended to only catch the self-literal address (that is, [1.2.3.4], where 1.2.3.4 is your IP address), but the code was broken. However, it will still do this if $M is defined; this is necessary to get client configurations to work (sigh). Note that this means that $M overrides :mailname entries in the user database! Problem noted by Paul Southworth. CONFIG: Fix definition of Solaris help file location. From Steve Cliffe . CONFIG: Fix bug that broke news.group.USENET mappings. CONFIG: Allow declaration of SMTP_MAILER_MAX, FAX_MAILER_MAX, and USENET_MAILER_MAX to tweak the maximum message size for various mailers. CONFIG: Change definition of USENET_MAILER_ARGS to include argv[0] instead of assuming that it is "inews" for consistency with other mailers. From Michael Corrigan of UC San Diego. CONFIG: When mail is forwarded to a LOCAL_RELAY or a MAIL_HUB, qualify the address in the SMTP envelope as user@{relay|hub} instead of user@$j. From Bill Wisner of The Well. CONFIG: Fix route-addr syntax in nullrelay configuration set. CONFIG: Don't turn off case mapping of user names in the local mailer for IRIX. This was different than most every other system. CONFIG: Avoid infinite loops on certainly list:; syntaxes in envelope. Noted by Thierry Besancon . CONFIG: Don't include -z by default on uux line -- most systems don't want it set by default. Pointed out by Philippe Michel of Thomson CSF. CONFIG: Fix some bugs with mailertables -- for example, if your host name was foo.bar.ray.com and you matched against ".ray.com", the old implementation bound %1 to "bar" instead of "foo.bar". Also, allow "." in the mailertable to match anything -- essentially, take over SMART_HOST. This also moves matching of explicit local host names before the mailertable so they don't have to be special cased in the mailertable data. Reported by Bill Gianopoulos of Raytheon; the fix for the %1 binding problem was contributed by Nicholas Comanos of the University of Sydney. CONFIG: Don't include "root" in class $=L (users to deliver locally, even if a hub or relay exists) by default. This is because of the known bug where definition of both a LOCAL_RELAY and a MAIL_HUB causes $=L to ignore both and deliver into the local mailbox. CONFIG: Move up bitdomain and uudomain handling so that they are done before .UUCP class matching; uudomain was reported as ineffective before. This also frees up diversion 8 for future use. Problem reported by Kimmo Suominen. CONFIG: Don't try to convert dotted IP address (e.g., [1.2.3.4]) into host names. As pointed out by Jonathan Kamens, these are often used because either the forward or reverse mapping is broken; this translation makes it broken again. DOC: Clarify $@ and $: in the Install & Op Guide. From Kimmo Suominen. Portability fixes: Unicos from David L. Kensiski of Sterling Sofware. DomainOS from Don Lewis of Silicon Systems. GNU m4 1.0.3 from Karst Koymans of Utrecht University. Convex from Kimmo Suominen . NetBSD from Adam Glass . BSD/386 from Tony Sanders of BSDI. Apollo from Eric Wassenaar. DGUX from Doug Anderson. Sequent DYNIX/ptx 2.0 from Tim Wright of Sequent. NEW FILES: src/Makefile.DomainOS src/Makefile.PTX src/Makefile.SunOS.5.1 src/Makefile.SunOS.5.2 src/Makefile.SunOS.5.x src/mailq.1 cf/ostype/domainos.m4 doc/op/Makefile doc/intro/Makefile doc/usenix/Makefile 8.6.5/8.6.5 94/01/13 Security fix: /.forward could be owned by anyone (the test to allow root to own any file was backwards). From Bob Campbell at U.C. Berkeley. Security fix: group ids were not completely set when programs were invoked. This caused programs to have group permissions they should not have had (usually group daemon instead of their own group). In particular, Perl scripts would refuse to run. Security: check to make sure files that are written are not symbolic links (at least under some circumstances). Although this does not respond to a specific known attack, it's just a good idea. Suggested by Christian Wettergren. Security fix: if a user had an NFS mounted home directory on a system with a restricted shell listed in their /etc/passwd entry, they could still execute any program by putting that in their .forward file. This fix prevents that by insisting that their shell appear in /etc/shells before allowing a .forward to execute a program or write a file. You can disable this by putting "*" in /etc/shells. It also won't permit world-writable :include: files to reference programs or files (there's no way to disable this). These behaviours are only one level deep -- for example, it is legal for a world-writable :include: file to reference an alias that writes a file, on the assumption that the alias file is well controlled. Security fix: root was not treated suspiciously enough when looking into subdirectories. This would potentially allow a cracker to examine files that were publically readable but in a non-publically searchable directory. Fix a problem that causes an error on QUIT on a cached connection to create problems on the current job. These are typically unrelated, so errors occur in the wrong place. Reset CurrentLA in sendall() -- this makes sendmail queue runs more responsive to load average, and fixes a problem that ignored the load average in locally generated mail. From Eric Wassenaar. Fix possible core dump on aliases with null LHS. From John Orthoefer of BB&N. Revert to using flock() whenever possible -- there are just too many bugs in fcntl() locking, particularly over NFS, that cause sendmail to fail in perverse ways. Fix a bug that causes the connection cache to get confused when sending error messages. This resulted in "unexpected close" messages. It should fix itself on the following queue run. Problem noted by Liudvikas Bukys of Rochester University. Include $k in $=k as documented in the Install & Op Guide. This seems odd, but it was documented.... From Michael Corrigan of UCSD. Fix problem that caused :include:s from alias files to be forced to be owned by root instead of daemon (actually DefUid). From Tim Irvin. Diagnose unrecognized I option values -- from Mortin Forssen of the Chalmers University of Technology. Make "error" mailer work consistently when there is no error code associated with it -- previously it returned OK even though there was a real problem. Now it assumes EX_UNAVAILABLE. Fix bug that caused the last header line of messages that had no body and which were terminated with EOF instead of "." to be discarded. Problem noted by Liudvikas Bukys. Fix core dump on SMTP mail to programs that failed -- it tried to go to a "next MX host" when none existed, causing a core dump. From der Mouse at McGill University. Change IDENTPROTO from a defined/not defined to a 0/1 switch; this makes it easier to turn it off (using -DIDENTPROTO=0 in the Makefile). From der Mouse. Fix YP_MASTER_NAME store to use the unupdated result of gethostname() (instead of myhostname(), which tries to fully qualify the name) to be consistent with SunOS. If your hostname is unqualified, this fixes transfers to slave servers. Bug noted by Keith McMillan of Ameritech Services, Inc. Fix Ultrix problem: gethostbyname() can return a very large (> 500) h_length field, which causes the sockaddr to be trashed. Use the size of the sockaddr instead. Fix from Bob Manson of Ohio State. Don't assume "-a." on host lookups if NAMED_BIND is not defined -- this confuses gethostbyname on hosts file lookups, which doesn't understand the trailing dot convention. Log SMTP server subprocesses that die with a signal instead of from a clean exit. If you don't have option "I" set, don't assume that a DNS "host unknown" message is authoritative -- it might still be found in /etc/hosts. Fix a problem that would cause Deferred: messages to be sent as the subject of an error message, even though the actual cause of a message was more severe than that. Problem noted by Chris Seabrook of OSSI. Fix race condition in DBM alias file locking. From Kyle Jones of UUNET. Limit delivery syslog line length to avoid bugs in some versions of syslog(3). This adds a new compile time variable SYSLOG_BUFSIZE. From Jay Plett of Princeton University, which is in turn derived from IDA. Fix quotes inside of comments in addresses -- previously it insisted that they be balanced, but the 822 spec says that they should be ignored. Dump open file state to syslog upon receiving SIGUSR1 (for debugging). This also evaluates ruleset 89, if set (with the null input), and logs the result. This should be used sparingly, since the rewrite process is not reentrant. Change -qI, -qR, and -qS flags to be case-insensitive as documented in the Bat Book. If the mailer returned EX_IOERR or EX_OSERR, sendmail did not return an error message and did not requeue the message. Fix based on code from Roland Dirlewanger of Reseau Regional Aquarel, Bordeaux, France. Fix a problem that caused a seg fault if you got a 421 error code during some parts of connection initialization. I've only seen this when talking to buggy mailers on the other end, but it shouldn't give a seg fault in any case. From Amir Plivatsky. Fix core dump caused by a ruleset call that returns null. Fix from Bryan Costales of ICSI. Full-Name: field was being ignored. Fix from Motonori Nakamura of Kyoto University. Fix a possible problem with very long input lines in setproctitle. From P{r Emanuelsson. Avoid putting "This is a warning message" out on return receipts. Suggested by Douglas Anderson. Detect loops caused by recursive ruleset calls. Suggested by Bryan Costales. Initialize non-alias maps during alias rebuilds -- they may be needed for parsing. Problem noted by Douglas Anderson. Log sender address even if no message was collected in SMTP (e.g., if all RCPTs failed). Suggested by Motonori Nakamura. Don't reflect the owner-list contents into the envelope sender address if the value contains ", :, /, or | (to avoid illegal addresses appearing there). Efficiency hack for toktype macro -- from Craig Partridge of BB&N. Clean up DNS error printing so that a host name is always included. Remember to set $i during queue runs. Reported by Stephen Campbell of Dartmouth University. If ${HOSTALIASES} is set, use it during canonification so that headers are properly mapped. Reported by Anne Bennett of Concordia University. Avoid printing misleading error message if SMTP mailer (not using [IPC]) should die on a core dump. Avoid incorrect diagnosis of "file 1 closed" when it is caused by the other end closing the connection. From Dave Morrison of Oracle. Improve several of the error messages printed by "mailq" to include a host name or other useful information. Add NetInfo preliminary support for NeXT systems. From Vince DeMarco. Fix a glitch that sometimes caused :include:s that pointed to NFS filesystems that were down to give an "aliasing/ forwarding loop broken" message instead of queueing the message for retry. Noted by William C Fenner of the NRL Connection Machine Facility. Fix a problem that could cause a core dump if the input sequence had (or somehow acquired) a \231 character. Make sure that route-addrs always have around them in non-SMTP envelopes (SMTP envelopes already do this properly). Avoid wierd headers on unbalanced punctuation of the form: ``Joe User ; this has uucp-dom semantics but old UUCP syntax. This also permits "uucp-old" as an alias for "uucp" and "uucp-new" as a synonym for "suucp" for consistency. CONFIG: add POP mailer support (from Kimmo Suominen ). CONFIG: drop CSNET_RELAY support -- CSNET is long gone. CONFIG: fix bug caused with domain literal addresses (e.g., ``[128.32.131.12]'') when FEATURE(allmasquerade) was set; it would get an additional @masquerade.host added to the address. Problem noted by Peter Wan of Georgia Tech. CONFIG: make sure that the local UUCP name is in $=w. From Jim Murray of Stratus. CONFIG: changes to UUCP rewriting to simulate IDA-style "V" mailer flag. Briefly, if you are sending to host "foo", then it rewrites "foo!...!baz" to "...!baz", "foo!baz" remains "foo!baz", and anything else has the local name prepended. CONFIG: portability fixes for HP-UX. DOC: several minor problems fixed in the Install & Op Guide. MAKEMAP: fix core dump problem on lines that are too long or which lack newline. From Mark Delany. MAILSTATS: print sums of columns (total messages & kbytes in and out of the system). From Tom Ferrin of UC San Francisco Computer Graphics Lab. SIGNIFICANT USER- OR SYSAD-VISIBLE CHANGES: On HP-UX, /etc/sendmail.cf has been moved to /usr/lib/sendmail.cf to match HP sendmail. Permissions have been tightened up on world-writable :include: files and accounts that have shells that are not listed in /etc/shells. This may cause some .forward files that have worked before to start failing. SIGUSR1 dumps some state to the log. NEW FILES: src/Makefile.DGUX src/Makefile.Dynix src/Makefile.FreeBSD src/Makefile.Mach386 src/Makefile.NetBSD src/Makefile.RISCos src/Makefile.SCO src/Makefile.SVR4 src/Makefile.Titan cf/mailer/pop.m4 cf/ostype/bsdi1.0.m4 cf/ostype/dgux.m4 cf/ostype/dynix3.2.m4 cf/ostype/sco3.2.m4 makemap/Makefile.dist praliases/Makefile.dist 8.6.4/8.6.4 93/10/31 Repair core-dump problem (write to read-only memory segment) if you fall back to the return-to-Postmaster case in savemail. Problem reported by Richard Liu. Immediately diagnose bogus sender addresses in SMTP. This makes quite certain that crackers can't use this class of attack. Reliability Fix: check return value from fclose() and fsync() in a few critical places. Minor problem in initsys() that reversed a condition for redirecting the output channel on queue runs. It's not clear this code even does anything. From Eric Wassenaar of the Dutch National Institute for Nuclear and High-Energy Physics. Fix some problems that caused queue runs to do "too much work", such as double-reading the Errors-To: header. From Eric Wassenaar. Error messages on writing the temporary file (including the data file) were getting suppressed in SMTP -- this fix causes them to be properly reported. From Eric Wassenaar. Some changes to support AF_UNIX sockets -- this will only really become relevant in the next release, but some people need it for local patches. From Michael Corrigan of UC San Diego. Use dynamically allocated memory (instead of static buffers) for macros defined in initsys() and settime(); since these can have different values depending on which envelope they are in. From Eric Wassenaar. Improve logging to show ctladdr on to= logging; this tells you what uid/gid processes ran as. Fix a problem that caused error messages to be discarded if the sender address was unparseable for some reason; this was supposed to fall back to the "return to postmaster" case. Improve aliaswait backoff algorithm. Portability patches for Linux (8.6.3 required another header file) (from Karl London) and SCO UNIX. CONFIG: patch prog mailer to not strip host name off of envelope addresses (so that it matches local again). From Christopher Davis. CONFIG: change uucp-dom mailer so that "<>" translates to $n; this prevents uux from seeing lines with null names like ``From Sat Oct 30 14:55:31 1993''. From Motonori Nakamura of Kyoto University. CONFIG: handle syntax correctly. This isn't legal, but it shouldn't fail miserably. From Motonori Nakamura. 8.6.3/8.6.3 93/10/24 IMPORTANT FIX: Fix several problems that caused open files to be "lost" during queue runs; this overflowed the open file table on large runs. An assumption that fdopen always succeeds sometimes resulted in core dumps when this happens; sometimes the message is delivered twice, sometimes (probably) infinite times. This problem in various form was reported by P{r (Pell) Emanuelsson and Robert Campbell of U.C. Berkeley. Special diagnosis of EMFILE error conditions -- it now prints the known open file descriptors so you can figure out what is consuming so much resources. Fix a couple of problems caused by early address parsing errors -- one caused it to return a "this is only a warning" when it really wasn't, and the other started parsing through a random pointer. The first was noted by Eric Wassenaar. Fix an infinite loop problem caused by null components in the host signature. Problem noted by Jan Sorensen. Be sure to reset the "current date" when sending an error message -- PostMasterCopy messages were being sent with an old Date: header. Fix a problem that caused duplicated mail when sendmail was (1) compiled without HASFLOCK, (2) you are sending to an alias that has an owner-* alias, (3) you execute sendmail with -t flag, (4) you run in -odb mode, and (5) the sender specifies both the alias name and another alias [i.e., the envelope is split], then duplicate messages are sent. The problem description and one-line fix are from Motonori Nakamura of Kyoto University. Avoid a problem that causes error messages to be discarded in some cases -- this was the result of a "fix" to avoid duplicate error messages, but two are better than zero. Reported by Tim Rylance. Fix a minor botch in checkfd012() -- fix from Dave Hill of Computervision R&D Ltd. Remove "X-Authentication-Warning: set sender to
using -f" entirely -- it is far too eager to include this, and it is confusing folks. I'll try to make it work "right" in 8.7. Problem noted by Yoshitaka Tokugawa of dit Co., Ltd. Fix a race condition with the errno value in tick() and reapchild() -- this caused occasional misdiagnosis of problems. Kyle Jones of UUNET helped this along. Repair rule loop-detection code. From Michael Corrigan of U.C. San Diego. Fix a problem that caused sender domain addition (C mailer flag to be ignored if you use -odq or use -odb with a high load average. Problem reported by Jim Murray of Stratus. Fix ident protocol on multi-homed machines. It was not always using the correct interface. Fix from J.R. Oldroyd of Opal. Previously, sendmail assumed that any SMTP greeting message that wasn't 2xx was a temporary failure -- it should only take 4xx as a temporary failure, and return a solid error message on anything else -- for example, to allow you to reject connections on a workstation that is MXed to a mail server. Portability enhancements for 386BSD/FreeBSD/NetBSD from Ollivier Robert. CONFIG: FEATURE(always_add_domain) didn't always add the domain; in particular, on local mail it modified the header sender but not the header recipient address(es). Reported by Jeffrey Honig of Cornell University. Also, strip any host from envelope recipient address(es), since local mailers don't understand host names -- this is to help mailertable entries. From Christopher Davis. CONFIG: masquerading didn't apply to addresses that already had a domain. This change replaces a local hostname by the masquerade name in the SMTP mailer (previously it only added the masquerade name if it didn't already have a domain name). Several people complained about this. 8.6.2/8.6.2 93/10/15 Put a "successful delivery" message in the transcript for addresses that get return-receipts. Put a prominent "this is only a warning" message in warning messages -- some people don't read carefully enough and end up sending the message several times. Include reason for temporary failure in the "warning" return message. Currently, it just says "cannot send for four hours". Fix the "Original message received" time generated for returntosender messages. It was previously listed as the current time. Bug reported by Eric Hagberg of Cornell University Medical College. If there is an error when writing the body of a message, don't send the trailing dot and wait for a response in sender SMTP, as this could cause the connection to hang up under some bizarre circumstances. From Eric Wassenaar. Fix some server SMTP synchronization problems caused when connections fail during message collection. From Eric Wassenaar. Fix a problem that can cause srvrsmtp to reject mail if the name server is down -- it accepts the RCPT but rejects the DATA command. Problem reported by Jim Murray of Stratus. Fix a problem that can cause core dumps if the config file incorrectly resolves to a null hostname. Reported by Allan Johannesen of WPI. Non-root use of -C flag, dangerous -f flags, and use of -oQ by non-root users were not put into X-Authentication-Warning:s as intended because the config file hadn't set the PrivacyFlags yet. Fix from Sven-Ove Westberg of the University of Lulea. Under very odd circumstances, the alias file rebuild code could get confused as to whether a database was open or not. Check "vendor code" on the end of V lines -- this is intended to provide a hook for vendor-specific configuration syntax. (This is a "new feature", but I've made an exception to my rule in a belief that this is a highly exceptional case.) Portability fixes for DG/UX (from Douglas Anderson of NCSC), SCO Unix (from Murray Kucherawy), A/UX, and OSF/1 (from Jon Forrest of UC Berkeley) CONFIG: fix ``mailer:host'' form of UUCP relay naming. 8.6.1/8.6 93/10/08 Portability fixes for A/UX and Encore UMAX V. Fix error message handling -- if you had a name server down causing an error during parsing, that message was never propogated to the queue file. 8.6/8.6 93/10/05 Configuration cleanup: make it easier to undo IDENTPROTO in conf.h (other systems have the same bug). If HASGETDTABLESIZE and _SC_OPEN_MAX are both defined, assume getdtablesize() instead of sysconf(); a disturbingly large number of systems defined _SC_OPEN_MAX in the header files but don't have the syscall. Another patch to really truly ignore MX records in getcanonname if trymx == FALSE. Fix problem that caused the "250 IAA25499 Message accepted for delivery" message to be omitted if there was an error in the header of the message (e.g., a bad Errors-To: line). Pointed out by Michael Corrigan of UCSD. Announce name of host we are chatting when we get errors; this is an IDA-ism suggested by Christophe Wolfhugel. Portability fixes for Alpha OSF/1 (from Anthony Baxter of the Australian Artificial Intelligence Institute), SCO Unix (from Murray Kucherawy of Hookup Communication Corp.), NeXT (from Vince DeMarco and myself), Linux (from Karl London ), BSDI (from Christophe Wolfhugel, and SVR4 on Dell (from Kimmo Suominen), AUX 3.0 on Macintosh, and ANSI C compilers. Some changes to get around gcc optimizer bugs. From Takahiro Kanbe. Fix error recovery in queueup if another tf file of the same name already exists. Problem stumbled over by Bill Wisner of The Well. Output YP_MASTER_NAME and YP_LAST_MODIFIED without null bytes. Problem noted by Keith McMillan of Ameritech Services. Deal with group permissions properly when opening .forward and :include: files. This relaxes the 8.1C restrictions slightly more. This includes proper setting of groups when reading :include: files, allowing you to read some files that you should be able to read but have previously been denied unless you owned them or they had "other" read permission. Make certain that $j is in $=w (after the .cf is read) so that if the user is forced to override some silly system, MX suppression will still work. Fix a couple of efficiency problems where newstr was double- calling expensive routines. In at least one case, it wasn't guaranteed that they would always return the same result. Problem noted by Christophe Wolfhugel. Fix null pointer dereference in putoutmsg -- only on an error condition from a non-SMTP mailer. From Motonori Nakamura. Macro expand "C" line class definitions before scanning so that "CX $Z" works. Fix problem that caused error message to be sent while still trying to send the original message if the connection is closed during a DATA command after getting an error on an RCPT command (pretty obscure). Problem reported by John Myers of CMU. Fix reply to NOOP to be 250 instead of 200 -- this is a long term bug. Fix a nasty bug causing core dumps when returning the "warning: cannot deliver for N hours -- will keep trying" message; it only occurred if you had PostMasterCopy set and only on some architectures. Although sendmail would keep trying, it would send error messages on each queue interval. This is an important fix. Allow u and g options to take user and group names respectively. Don't do a chdir into the queue directory in -bt mode to make ruleset testing a bit easier. Don't allow users to turn off logging (using -oL) on the command line -- command line can only raise, not lower, logging level. Set $u to the original recipient on the SMTP transaction or on the command line. This is only done if there is exactly one recipient. Technically, this does not meet the specs, because it does not guarantee a domain on the address. Fix a problem that dumped error messages on bad addresses if you used the -t flag. Problem noted by Josh Smith of Harvey Mudd College. Given an address such as `` '', auto-quote the first ``'' part, giving ``"" ''. This is to avoid the problem of people who use angle brackets in their full name information. Fix a null pointer dereference if you set option "l", have an Errors-To: header in the message, and have Errors-To: defined in the config file H lines. From J.R. Oldroyd. Put YPCOMPAT on #ifdef NIS instead -- it's one less thing to get wrong when compiling. Suggested by Rick McCarty of TI. Fix a problem that could pass negative SIZE parameter if the df file got lost; this would cause servers to always give a temporary failure, making the problem even worse. Problem noted by Allan Johannesen of WPI. Add "ident" timeout (one of the "r" option selectors) for IDENT protocol timeouts (30s default). Requested by Murray Kucherawy of HookUp Communication Corp. to handle bogus PC TCP/IP implementations. Change $w default definition to be just the first component of the domain name on config level 5. The $j macro defaults to the FQDN; $m remains as before. This lets well-behaved config files use any of the short, long, or subdomain names. Add makesendmail script in src to try to automate multi-architecture builds. I know, this is sub-optimal, but it is still helpful. Fix very obscure race condition that can cause a queue run to get a queue file for an already completed job. This problem has existed for years. Problem noted by the long suffering Allan Johannesen of WPI. Fix a problem that caused the raw sender name to be passed to udbsender instead of the canonified name -- this caused it to sometimes miss records that it should have found. Relax check of name on HELO packet so that a program using -bs that claims to be itself works properly. Restore rewriting of $: part of address through 2, R, 4 in buildaddr -- this requires passing a lot of flags to get it right. Unlike old versions, this ONLY rewrites recipient addresses, not sender addresses. Fix a bug that caused core dumps in config files that cannot resolve /file/name style addresses. Fix from Jonathan Kamens of OpenVision Technologies. Fix problem with fcntl locking that can cause error returns to be lost if the lock is lost; this required fully queueing everything, dropping the envelope (so errors would get returned), and then re-reading the queue from scratch. Fix a problem that caused aliases that redefine an otherwise true address to still send to the original address if and only if the alias failed in certain bizarre ways (e.g, if they pointed at a list:; syntax address). Problem pointed out by Jonathan Kamens. Remove support for frozen configuration files. They caused more trouble than it was worth. Fix problem that can cause error messages to get ignored when using both -odb and -t flags. Problem noted by Rob McNicholas at U.C. Berkeley. Include all "normal" variations on hostname in $=w. For example, if the host name is vangogh.cs.berkeley.edu, $=w will contain vangogh, vangogh.cs, and vangogh.cs.berkeley.edu. Add "restrictqrun" privacy flag -- without this, anyone can run the queue. Reset SmtpPhase global on initial connection creation so that messages don't come out with stale information. Pass an "ext" argument to lockfile so that error/log messages will properly reflect the true filename being locked. Put all [...] address forms into $=w -- this eliminates the need for MAXIPADDR in conf.h. Suggested by John Gardiner Myers of CMU. Fix a bug that can cause qf files to be left around even after an SMTP RSET command. Problem and fix from Michael Corrigan. Don't send a PostMasterCopy to errors when the Precedence: is negative. Error reports still go to the envelope sender address. Add LA_SHORT for load averages. Lock sendmail.st file when posting statistics. Add "SendBufSize" and "RcvBufSize" suboptions to "O" option to set the size of the TCP send and receive buffers; if you run over a slow slip line you may need to set these down (although it would be better to fix the SLIP implementation so that it's not necessary to recompile every program that does bulk data transfer). Allow null defaults on $( ... $) lookups. Problem reported by Amir Plivatsky. Diagnose crufty S and V config lines. This resulted from an observation that some people were using the SITE macro without the SITECONFIG macro first, which was causing bogus config files that were not caught. Fix makemap -f flag to turn off case folding (it was turning it on instead). THIS IS A USER VISIBLE CHANGE!!! Fix a problem that caused multiple error messages to be sent if you used "sendmail -t -oem -odb", your system uses fcntl locking, and one of the recipient addresses is unknown. Reset uid earlier in include() so that recursive .forwards or :include:s don't use the wrong uid. If file descriptor 0, 1, or 2 was closed when sendmail was called, the code to recover the descriptor was broken. This sometimes (only sometimes) caused problems with the alias file. Fix from Motonori Nakamura. Fix a problem that caused aliaswait to go into infinite recursion if the @:@ metasymbol wasn't found in the alias file. Improve error message on newaliases if database files cannot be opened or if running with no database format defined. Do a better estimation of the size of error messages when NoReturn is set. Problem noted by P{r (Pell) Emanuelsson. Fix a problem causing the "c" option (don't connect to expensive mailers) to be ignored in SMTP. Problem noted and the solution suggested by Robert Elz of Munnari University. Improve connection caching algorithm by passing "[host]" to hostsignature, which strips the square brackets and returns the real name. This allows mailertable entries to match regular entries. Re-enable Return-Receipt-To: -- people seem to want this stupid feature, even if it doesn't work right. Catch and log attempts to try the "wiz" command in server SMTP. This also ups the log level from LOG_NOTICE to LOG_CRIT. Be more generous at assigning $z to the home directory -- do this for programs that are specified through a .forward file. Fix from Andrew Chang of Sun Microsystems. Always save a fatal error message in preference to a non-fatal error message so that the "subject" line of return messages is the best possible. CONFIG: reduce the number of quotes needed to quote configuration parameters with commas: two quotes should work now, e.g., define(ALIAS_FILE, ``/etc/aliases,/etc/aliases.local''). CONFIG: class $=Z is a set of UUCP hosts that use uucp-dom connections (domain-ized UUCP). CONFIG: fix bug in default maps (-o must be before database file name). Pointed out by Christophe Wolfhugel. CONFIG: add FEATURE(nodns) to state that we are not relying on DNS. This would presumably be used in UUCP islands. CONFIG: add OSTYPE(nextstep) and OSTYPE(linux). CONFIG: log $u in Received: line. This is in technical violation of the standards, since it doesn't guarantee a domain on the address. CONFIG: don't assume "m" in local mailer flags -- this means that if you redefine LOCAL_MAILER_FLAGS you will have to include the "m" flag should you want it. Apparently some Solaris 2.2 installations can't handle multiple local recipients. Problem noted by Josh Smith. CONFIG: add confDOMAIN_NAME to set $j (if undefined, $j defaults). CONFIG: change default version level from 4 to 5. CONFIG: add FEATURE(nullclient) to create a config file that forwards all mail to a hub without ever looking at the addresses in any detail. CONFIG: properly strip mailer: information off of relays when used to change .BITNET form into %-hack form. CONFIG: fix a problem that caused infinite loops if presented with an address such as "!foo". CONFIG: check for self literal (e.g., [128.32.131.12]) even if the reverse "PTR" mapping is broken. There's a better way to do this, but the change is fairly major and I want to hold it for another release. Problem noted by Bret Marquis. 8.5/8.5 93/07/23 Serious bug: if you used a command line recipient that was unknown sendmail would not send a return message (it was treating everything as though it had an SMTP-style client that would do the return itself). Problem noted by Josh Smith. Change "trymx" option in getcanonname() to ignore all MX data, even during a T_ANY query. This actually didn't break anything, because the only time you called getcanonname with !trymx was if you already knew there were no MX records, but it is somewhat cleaner. From Motonori Nakamura. Don't call getcanonname from getmxrr if you already know there are no DNS records matching the name. Fix a problem causing error messages to always include "The original message was received ... from localhost". The correct original host information is now included. Previous change to cf/sh/makeinfo.sh doesn't port to Ultrix (their version of "test" doesn't have the -x flag). Change it to use -f instead. From John Myers. CONFIG: 8.4 mistakenly set the default SMTP-style mailer to esmtp -- it should be smtp. CONFIG: send all relayed mail using confRELAY_MAILER (defaults to "relay" (a variant of "smtp") if MAILER(smtp) is used, else "suucp" if MAILER(uucp) is used, else "unknown"); this cleans up the configs somewhat. This fixes a serious problem that caused route-addrs to get mistaken as relays, pointed out by John Myers. WARNING: this also causes the default on SMART_HOST to change from "suucp" to "relay" if you have MAILER(smtp) specified. 8.4/8.4 93/07/22 Add option `w'. If you receive a message that comes to you because you are the best (lowest preference) target of an MX, and you haven't explicitly recognized the source MX host in your .cf file, this option will cause you to try the target host directly (as if there were no MX for it at all). If `w' is not set, this case is a configuration error. Beware: if `w' is set, senders may get bogus errors like "message timed out" or "host unknown" for problems that are really configuration errors. This option is disrecommended, provided only for compatibility with UIUC sendmail. Fix a problem that caused the incoming socket to be left open when sendmail forks after the DATA command. This caused calling systems to wait in FIN_WAIT_2 state until the entire list was processed and the child closed -- a potentially prodigious amount of time. Problem noted by Neil Rickert. Fix problem (created in 6.64) that caused mail sent to multiple addresses, one of which was a bad address, to completely suppress the sending of the message. This changes handling of EF_FATALERRS somewhat, and adds an EF_GLOBALERRS flag. This also fixes a potential problem with duplicate error messages if there is a syntax error in the header of a message that isn't noticed until late in processing. Original problem pointed out by Josh Smith of Harvey Mudd College. This release includes quite a bit of dickering with error handling (see below). Back out SMTP transaction if MAIL gets nested 501 error. This will only hurt already-broken software and should help humans. Fix a problem that broke aliases when neither NDBM nor NEWDB were compiled in. It would never read the alias file. Repair unbalanced `)' and `>' (the "open" versions are already repaired). Logging of "done" in dropenvelope() was incorrect: it would log this even when the queue file still existed. Change this to only log "done" (at log level 11) when the queue file is actually removed. From John Myers. Log "lost connection" in server SMTP at log level 20 if there is no pending transaction. Some senders just close the connection rather than sending QUIT. Fix a bug causing getmxrr to add a dot to the end of unqualified domains that do not have MX records -- this would cause the subsequent host name lookup to fail. The problem only occurred if you had FEATURE(nocanonify) set. Problem noted by Rick McCarty of Texas Instruments. Fix invocation of setvbuf when passed a -X flag -- I had unwittingly used an ANSI C extension, and this caused core dumps on some machines. Diagnose self-destructive alias loops on RCPT as well as EXPN. Previously it just gave an empty send queue, which then gave either "Need RCPT (recipient)" at the DATA (confusing, since you had given an RCPT command which returned 250) or just dropped the email, depending on whether you were running VERBose mode. Now it usually diagnoses this case as "aliasing/forwarding loop broken". Unfortunately, it still doesn't adequately diagnose some true error conditions. Add internal concept of "warning messages" using 6xx codes. These are not reported only to Postmaster. Unbalanced parens, brackets, and quotes are printed as 653 codes. They are always mapped to 5xx codes before use in SMTP. Clean up error messages to tell both the actual address that failed and the alias they arose from. This makes it somewhat easier to diagnose problems. Difficulty noted by Motonori Nakamura. Fix a problem that inappropriately added a ctladdr to addresses that shouldn't have had one during a queue run. This caused error messages to be handled differently during a queue run than a direct run. Don't print the qf name and line number if you get errors during the direct run of the queue from srvrsmtp -- this was just extra stuff for users to crawl through. Put command line flags on second line of pid file so you can auto-restart the daemon with all appropriate arguments. Use "kill `head -1 /etc/sendmail.pid`" to stop the daemon, and "eval `tail -1 /etc/sendmail.pid`" to restart it. Remove the ``setuid(getuid())'' in main -- this caused the IDENT daemon to screw up. This required that I change HASSETEUID to HASSETREUID and complicate the mode changing somewhat because both Ultrix and SunOS seem to have a bug causing seteuid() to set the saved uid as well as the effective. The program test/t_setreuid.c will test to see if your implementation of setreuid(2) is appropriately functional. The FallBackMX (option V) handling failed to properly identify fallback to yourself -- most of the code was there, but it wasn't being enabled. Problem noted by Murray Kucherawy of the University of Waterloo. Change :include: open timeout from ETIMEDOUT to an internal code EOPENTIMEOUT; this avoids adding "during SmtpPhase with CurHostName" in error messages, which can be confusing. Reported by Jonathan Kamens of OpenVision Technologies. Back out setpgrp (setpgid on POSIX systems) call to reset the process group id. The original fix was to get around some problems with recalcitrant MUAs, but it breaks any call from a shell that creates a process group id different from the process id. I could try to fix this by diddling the tty owner (using tcsetpgrp or equivalent) but this is too likely to break other things. Portability changes: Support -M as equivalent to -oM on Ultrix -- apparently DECnet calls sendmail with -MrDECnet -Ms -bs instead of using standard flags. Oh joy. This behaviour reported by Jon Giltner of University of Colorado. SGI IRIX -- this includes several changes that should help other strict ANSI compilers. SCO Unix -- from Murray Kucherawy of HookUp Communication Corporation. Solaris running the Sun C compiler (which despite the documentation apparently doesn't define __STDC__ by default). ConvexOS from Eric Schnoebelen of Convex. Sony NEWS workstations and Omron LUNA workstations from Motonori Nakamura. CONFIG: add confTRY_NULL_MX_LIST to set option `w'. CONFIG: delete `C' and `e' from default SMTP mailers flags; several people have made a good argument that this creates more problems than it solves (although this may prove painful in the short run). CONFIG: generalize all the relays to accept a "mailer:host" format. CONFIG: move local processing in ruleset 0 into a new ruleset 98 (8 on old sendmail). Domain literal [a.b.c.d] addresses are also passed through this ruleset. CONFIG: if neither SMART_HOST nor MAILER(smtp) were defined, internet-style addresses would "fall off the end" of ruleset zero and be interpreted as local -- however, the angle brackets confused the recursive call. These are now diagnosed as "Unrecognized host name". CONFIG: USENET rules weren't included in S0 because of a mistaken ifdef(`_MAILER_USENET_') instead of ifdef(`_MAILER_usenet_'). Problem found by Rein Tollevik of SINTEF RUNIT, Oslo. CONFIG: move up LOCAL_RULE_0 processing so that it happens very early in ruleset 0; this allows .mc authors to bypass things like the "short circuit" code for local addresses. Prompted by a comment by Bill Wisner of The Well. CONFIG: add confSMTP_MAILER to define the mailer used (smtp or esmtp) to send SMTP mail. This allows you to default to esmtp but use a mailertable or other override to deal with broken servers. This logic was pointed out to me by Bill Wisner. Ditto for confLOCAL_MAILER. Changes to cf/sh/makeinfo.sh to make it portable to SVR4 environments. Ugly as sin. 8.3/8.3 93/07/13 Fix setuid problems introduced in 8.2 that caused messages like "Cannot create qfXXXXXX: Invalid argument" or "Cannot reopen dfXXXXXX: Permission denied". This involved a new compile flag "HASSETEUID" that takes the place of the old _POSIX_SAVED_IDS -- it turns out that the POSIX interface is broken enough to break some systems badly. This includes some fixes for HP-UX. Also fixes problems where the real uid is not reset properly on startup (from Neil Rickert). Fix a problem that caused timed out messages to not report the addresses that timed out. Error messages are also more "user friendly". Drop required bandwidth on connections from 64 bytes/sec to 16 bytes/sec. Further Solaris portability changes -- doesn't require the BSD compatibility library. This also adds a new "HASGETDTABLESIZE" compile flag which can be used if you want to use getdtablesize(2) instead of sysconf(2). These are loosely based on changes from David Meyer at University of Oregon. This now seems to work, at least for quick test cases. Fix a problem that can cause duplicate error messages to be sent if you are in SMTP, you send to multiple addresses, and at least one of those addresses is good and points to an account that has a .forward file (whew!). Fix a problem causing messages to be discarded if checkcompat() returned EX_TEMPFAIL (because it didn't properly mark the "to" address). Problem noted by John Myers. Fix dfopen to return NULL if the open failed; I was depending on fdopen(-1) returning NULL, which isn't the case. This isn't serious, but does result in wierd error diagnoses. From Michael Corrigan. CONFIG: add UUCP_MAX_SIZE M4 macro to set the maximum size of messages sent through UUCP-family mailers. Suggested by Bill Wisner of The Well. CONFIG: if both MAILER(uucp) and MAILER(smtp) are specified, include a "uucp-dom" mailer that uses domain-style addressing. Suggested by Bill Wisner. CONFIG: Add LOCAL_SHELL_FLAGS and LOCAL_SHELL_ARGS to match LOCAL_MAILER_FLAGS and LOCAL_MAILER_ARGS. Suggested by Christophe Wolfhugel. CONFIG: Add OSTYPE(aix3). From Christophe Wolfhugel. 8.2/8.2 93/07/11 Don't drop out on config file parse errors in -bt mode. On older configuration files, assume option "l" (use Errors-To header) for back compatibility. NOTE: this DOES NOT imply an endorsement of the Errors-To: header in any way. Accept -x flag on AIX-3 as well as OSF/1. Why, why, why??? Don't log errors on EHLO -- it isn't a "real" error for an old SMTP server to give an error on this command, and logging it in the transcript can be confusing. Fix from Bill Wisner. IRIX compatibility changes provided by Dan Rich . Solaris 2 compatibility changes. Provided by Bob Cunningham , John Oleynick Debugging: -d17 was overloaded (hostsignature and usersmtp.c); move usersmtp (smtpinit and smtpmailfrom) to -d18 to match the other flags in that file. Flush transcript before fork in mailfile(). From Eric Wassenaar. Save h_errno in mci struct and improve error message display. Changes from Eric Wassenaar. Open /dev/null for the transcript if the create of the xf file failed; this avoids at least one possible null pointer reference in very wierd cases. From Eric Wassenaar. Clean up statistics gathering; it was over-reporting because of forks. From Eric Wassenaar. Fix problem that causes old Return-Path: line to override new Return-Path: line (conf.c needs H_FORCE to avoid re-using old value). From Motonori Nakamura. Fix broken -m flag in K definition -- even if -m (match only) was specified, it would still replace the key with the value. Noted by Rick McCarty of Texas Instruments. If the name server timed out over several days, no "timed out" message would ever be sent back. The timeout code has been moved from markfailure() to dropenvelope() so that all such failures should be diagnosted. Pointed out by Christophe Wolfhugel and others. Relax safefile() constraints: directories in an include or forward path must be readable by self if the controlling user owns the entry, readable by all otherwise (e.g., when reading your .forward file, you have to own and have X permssion in it; everyone needs X permission in the root and directories leading up to your home); include files must be readable by anyone, but need not be owned by you. If _POSIX_SAVED_IDS is defined, setuid to the owner before reading a .forward file; this gets around some problems on NFS mounts if root permission is not exported and the user's home directory isn't x'able. Additional NeXT portability enhancements from Axel Zinser. Additional HP-UX portability enhancements from Brian Bullen. Add a timeout around SMTP message writes; this assumes you can get throughput of at least 64 bytes/second. Note that this does not impact the "datafinal" default, which is separate; this is just intended to work around network clogs that will occur before the final dot is sent. From Eric Wassenaar. Change map code to set the "include null" flag adaptively -- it initially tries both, but if it finds anything matching without a null it never tries again with a null and vice versa. If -N is specified, it never tries without the null and creates new maps with a null byte. If -O is specified, it never tries with the null (for efficiency). If -N and -O are specified, you get -NO (get it?) lookup at all, so this would be a bad idea. If you don't specify either -N or -O, it adapts. Fix recognition of "same from address" so that MH submissions will insert the appropriate full name information; this used to work and got broken somewhere along the way. Some changes to eliminate some unnecessary SYSERRs in the log. For example, if you lost a connection, don't bother reporting that fact on the connection you lost. Add some "extended debugging" flags to try to track down why we get occassional problems with file descriptor one being closed when execing a mailer; it seems to only happen when there has been another error in the same transaction. This requires XDEBUG, defined by default in conf.h. Add "-X filename" command line flag, which logs both sides of all SMTP transactions. This is intended ONLY for debugging bad implementations of other mailers; start it up, send a message from a mailer that is failing, and then kill it off and examine the indicated log. This output is not intended to be particularly human readable. This also adds the HASSETVBUF compile flag, defaulted on if your compiler defines __STDC__. CONFIG: change SMART_HOST to override an SMTP mailer. If you have a local net that should get direct connects, you will need to use LOCAL_NET_CONFIG to catch these hosts. See cf/README for an example. CONFIG: add LOCAL_MAILER_ARGS (default: `mail -d $u') to handle sites that don't use the -d flag. CONFIG: hide recipient addresses as well as sender addresses behind $M if FEATURE(allmasquerade) is specified; this has been requested by several people, but can break local aliases. For example, if you mail to "localalias" this will be rewritten as "localalias@masqueradehost"; although initial delivery will work, replies will be broken. Use it sparingly. CONFIG: add FEATURE(domaintable). This maps unqualified domains to qualified domains in headers. I believe this is largely equivalent to the IDA feature of the same name. CONFIG: use $U as UUCP name instead of $k. This permits you to override the "system name" as your UUCP name -- in particular, to use domain-ized UUCP names. From Bill Wisner of The Well. CONFIG: create new mailer "esmtp" that always tries EHLO first. This is currently unused in the config files, but could be used in a mailertable entry. 8.1C/8.1B 93/06/27 Serious security bug fix: it was possible to read any file on the system, regardless of ownership and permissions. If a subroutine returns a fully qualified address, return it immediately instead of feeding it back into rewriting. This fixes a problem with mailertable lookups. CONFIG: fix some M4 frotz (concat => CONCAT) 8.1B/8.1A 93/06/12 Serious bug fix: pattern matching backup algorithm stepped by two tokens in classes instead of one. Found by Claus Assmann at University of Kiel, Germany. 8.1A/8.1A 93/06/08 Another mailertable fix.... 8.1/8.1 93/06/07 4.4BSD freeze. No semantic changes. 6.65/6.34 93/06/06 Fix some lintish problems. Fix some cases where server SMTP behaved poorly when handed bogus input, pointed out by Eric Wassenaar. CONFIG: fix some more (sigh) mailertable bugs -- thanks to Motonori Nakamura of Kyoto University (again). 6.64/6.33 93/06/05 Don't send 050 (-v) information after the 250 response to a QUIT command in srvrsmtp -- clients usually close the connection at this point, and it causes bogus error messages. Don't send messages that have errors on input (such as unbalanced parentheses) during SMTP transactions, since a return message has (probably) already been sent. Give better diagnostics on timeouts during network reads, including information similar to the SMTP phase. Fix bug that caused SMTP messages to deliver synchronously; this happened after the DATA 250, and hence caused reading the next command to be delayed. Ignore Errors-To: header unless 'l' (lower case el) header is specified. The Errors-To: header violates RFC 1123. Errors-To: was only needed to take the place of the envelope sender in the days when most Unix mailers didn't understand about the two kinds of senders. Don't send warning messages in response to automatically generated messages (that is, those From:<>). CONFIG: fix some rather stupid typos in the mailertable code pointed out by Motonori Nakamura of Kyoto University. CONFIG: add confUSE_ERRORS_TO configuration option. CONFIG: if ALWAYS_ADD_DOMAIN is selected, try to use $M (masquerade name) instead of $j. CONFIG: don't add dots to relay names (added in 6.29); it breaks several things, and can be simulated by dot terminating the names of relays. For example, use: DBbit.net.relay. (note the trailing dot). 6.63/6.32 93/06/01 Fix prototypes to eliminate chars in argument lists -- some compilers are pissy about this. Log protocol ($r) and body type if set so we can determine if the adaptive algorithms are working. Pessimize on locking of database files (particularly for NEWDB databases) during opens. There were problems with processes opening the file while it was rebuilt; since NEWDB caches heavily, the reader opened an empty file, which is an error. If your system has the ability to lock atomically on open, this works properly; otherwise, there are race conditions. Check mod time on .pag file instead of .dir in NDBM aliases because the .dir file doesn't get updated for small alias files. From John Gardiner Myers of CMU. More Solaris portability -- it now compiles on Solaris, but hangs up in gethostbyname(). Move setting of RES_DEBUG flag before first myhostname() call so we can see name server traffic on that call. Fsync() queue files. Fix a problem that causes -bi to try to rebuild maps other than the alias file(s). Fix a problem that caused udb to reject entries from any but the first database listed. Rearrange doc subdirectory for 4.4BSD release tape. CONFIG: put $r into the Received line. This was an oversight. CONFIG: fix typo (call to ruleset 99 should have been rulset 90). CONFIG: move "auxiliary" subroutines to be in ruleset 90-99 range -- in the long run, single digit rulesets may become reserved for builtin use by sendmail. CONFIG: fix major problem that causes host aliases (that is, anything in $=w != $j) to not be recognized. This has been around since 6.30. 6.62/6.31 93/05/28 BETA RELEASE Fix recursive syserr (if there is an error printing a syserr message). This makes the code much less eager to consider a write error as serious. This also includes some heuristics to be clever about closed connections. Lock NEWDB files during gets. This requires version 1.5 or later of the db library. If you have an older version, you can use -DOLD_NEWDB. This will go away in a few weeks. Fix problem causing aliases that use host maps to get overwritten. Do appropriate byte swapping on port numbers in ident protocol code. Fix from Allan Johannesen of WPI. Defer opening of map files to the same time as alias files so that the daemon will tend to pick up new versions more promptly. Prototype a bunch more functions. Some Solaris 2.1 changes (still doesn't link though). Try to simplify Makefiles by including more subordinate #defines in conf.h (based on OS type). CONFIG: check for domains if FEATURE(mailertable) is defined. For example, if the host name is "knecht.cs.berkeley.edu" it will search the following mailertable keys: knecht.cs.berkeley.edu .cs.berkeley.edu .berkeley.edu .edu This could be used to replace the special relays for bitnet and similar nets. 6.61/6.30 93/05/24 Fix problem that prevented appending dots on canonified host names. This breaks tons of config files -- very important fix. Fix improper pointer dereference in response to HELO command. Fix core dump if debugging set in map_rewrite. CONFIG: add FEATURE(always_add_domain) to always attach the local domain (only impacts local mail). CONFIG: try to avoid turning names into $j -- although technically a host can only have one "canonical name", it seems to be common practice to have several. 6.60/6.29 93/05/22 Major change: merge alias databases with maps. This expands and changes the map class interface but fixes a bunch of bugs. The important user-visible change is that the file name in a K line now does not include the ".db" extension; this is added automatically. Also, the -d (NIS domain) flag is missing from the K config line; use @domain instead. When compiling, the *_MAP names are gone -- just compile in NDBM, NEWDB, and/or NIS support. Announce mailer/host/user triple on -bv flag -- from Brian Bullen of Stirling University. Don't send more than one line in response to HELO -- it confuses Pony Express, which then behaves very badly. However, this change does send two line 220 greetings, with the second line reading "ESMTP spoken here". The usersmtp module recognizes this and goes into ESMTP mode regardless of the setting of the "a" mailer flag. Thus, "a" means "always try EHLO". AIX portability changes (thanks to Christophe Wolfhugel of Herve Schauer Consultants (Paris) for providing me with an INSA account for this purpose). Lightly tested. Use -D_AIX3. This probably breaks compatibility with some older systems (e.g., 4.2bsd) but still works on SunOS 4.1.2, Ultrix 4.2A, HP-UX 8.07, OSF/1 T1.3, and AIX 3.2.3. Fix a problem causing an error message loop if the output channel is hosed. Add the Makefiles that I use for various environments -- some are Berkeley make versions and some are old make versions. My makefile for the NeXT box has gotten lost, alas! PRALIASES: support for printing NEWDB databases. From Michael J. Corrigan of U.C. San Diego. CONFIG: don't pass pseudo-domains to $[ ... $] (if you have a wildcard MX it can have wierd results). From Christophe Wolfhugel. CONFIG: dot terminate relay hostnames in S0. From Christophe Wolfhugel. 6.59/6.28 93/05/13 Log version with SMTP daemon startup message. Adjust setproctitle to work on NetBSD and BSD/386. Fix null pointer reference in MX fallback code. A bunch of minor fixes from Eric Wassenaar: If deliver cannot execv the mailer, return EX_OSERR instead of EX_TEMPFAIL (to give better error messages). Consistently malloc e_message. Catch degenerate case of calling returntosender() with an empty returnq. MIME reformatting. 6.58/6.28 93/05/13 Fix bug that can cause incorrect verbose display of user smtp messages. Disable SMTP VERB command if PRIV_NOEXPN is set (since this could reveal the same information. Allow failure when reading SMTP greeting message to go on to next MX host. Add "MIME-Version: 1.0" header if using MIME (this was NOT included in RFC 1344, but Bill King of Allan-Bradley Company forwarded me email from Nathaniel Borenstein claiming that it was an inadvertent omission). Don't use Content-Type: X-message-header. According to John Myers of CMU, many MIME readers will completely ignore the data if they don't recognize it. Instead, just add a blank line to make it a legal (empty) message. Fix problem causing dots to keep getting appended to cached hostnames. This can cause buffer overrun conditions. The problem was found by Erik Forsberg of Retix, although I used a different bug fix than he provided. Fix parsing of split header/envelope rewriting specs -- from Eric Forsberg. Fix from Eric Wassenaar to correct To: lists in error messages. 6.57/6.28 93/05/11 Fix minor glitch causing extra ctladdrs to be output to queue file. Just an annoyance. Cache results of name server canonification lookups to avoid backed up queue runs. Major rewrite of alias.c: considerable cleanup, plus sample (untested) support for NIS aliases. The "A" option can now be a comma separated list (or be repeated) -- that is, you can have multiple alias databases. Each database can have the syntax ``class:file''; if no class is specified, the "implicit" class is assumed. Implicit searches through a list of compiled in types -- hash, dbm, nis, and stab. Alias files are searched in the order they are listed. For example: OAhash:/etc/aliases.local,/etc/aliases OAnis:mail.aliases@my.nis.domain first searches the hash database /etc/aliases.local, then the regular /etc/aliases database, then the NIS map "mail.aliases" in the NIS domain "my.nis.domain". If in Verbose mode (probably from VERB command) run SMTP job in foreground and don't do RCPT optimizations. Add udb :mailsender as equivalent to owner- for regular aliases. Delete option 8; add option 7 that means the opposite. That is, default to 8-bit mode; a special option is needed to force sendmail into 7 bit mode. Send error messages in encapsulated MIME format. New compile flag "NIS" that turns on NIS alias and NIS map support. Add "j" option to send error messages in MIME (RFC 1341) encapsulated message format per RFC 1344. The syntax is pretty ugly if you don't have MIME-aware user agents. Clean up message handling (for display in mailq output). New setproctitle implementation for 4.4bsd. Create files (such as ~/dead.letter) using mode FileMode (the F option value) instead of 0666. Fix bug causing output of EXPN command to not be fully qualified. This may cause some problems with UUCP addresses that will require some config file assistance -- specifically, the $: part has to include the host name for this output to make sense. Fix a problem that sometimes diagnosed errors and still sent the message if the header syntax was bad. Fix a bug that caused an error message to be emailed when sendmail was operating in -bv mode. Add "ListenQueueSize" keyword to daemon options option (OO) to set the queue size parameter passed to listen(). You will normally have to tweak your kernel to up this. Strip spaces off of beginning of message-id before logging (in case it was folded across lines). Tweak compile flags in daemon.c -- there were some cases where it wouldn't work without NETINET. Change *file* mailer to output all the usual default headers (From, Date, Message-Id). It gets used when sending back error messages. CONFIG: explicitly catch and diagnose list:; syntax in ruleset zero -- this is not a valid recipient syntax according to RFC 821. CONFIG: add confMIME_FORMAT_ERRORS to send error messages in MIME format. Defaults to on. CONFIG: add SMTP_MAILER_FLAGS and UUCP_MAILER_FLAGS to augment the flags for those mailers. 6.56/6.27 93/05/01 Fix problem that causes the fallback mail to postmaster (case ESM_POSTMASTER in savemail()) to not look at aliases (ugh). Some more HPUX tweaking (compile flag hpux => __hpux so it still works in ANSI mode). Don't try to flock non-regular files when mailing to a file. In particular, this was a problem if you tried to send to /dev/null. Fix a wierd bug that can cause senders to be queued as recipients if the name server is down when the mail is initially sent. This hack just ignores sender deletion (essentially, it sets the MeToo flag) if there is a TEMPFAIL during processing of the sender address. Obscure. Fix a dangling else problem -- from Brian Bullen from University of Stirling, UK. Add the "b" mailer flag to force a blank line on the end of messages. Some brilliant versions of /bin/mail insist on this but do not add it themselves. Add the "g" mailer flag to prevent user SMTP from sending "MAIL From:<>". This is only intended to be a transitional gesture, and should not be used if at all possible. It appears that Berkeley and IDA config files have always handled this properly; the UK config kit apparently does not. Don't lowercase and then capitalize header field names -- leave them with original capitalization. Fixes from Bill King of Allen-Bradley Company. Further cleanup and improved reporting of error messages, particularly conditions that cause messages to be requeued for future delivery. Tweak syslog priorities in some cases. CONFIG: clean up route-addr on UUCP addresses. 6.55/6.25 93/04/27 HPUX 8.07 compatibility changes in getla() -- I had to make these changes to get it to work at Berkeley, although others seem to have been working before (???). Various patches to XLA code. Fix problem that causes setuid bit on files to be ignored from SMTP or in queue runs. Problem noted by Jason Ornstein of Under The Wire, Inc. Fix problem that can cause CNAMEs to be ignored. Generalize getmxrr to match local host in $=w instead of a single name passed in. Some cleanup from Eric Wassenaar: Use FileMailer instead of ProgMailer in two places. Eliminate duplicate 8th-bit stripping in commaize. Fix a problem with mis-parsing of backslash escapes under some circumstances. NIS map fix (was always including trailing null character) from Mike Glendinning of Ingres UK. Add "a" mailer flag to try using ESMTP. It tries the EHLO command and if that fails falls back to regular SMTP. Also parses EHLO option keywords. If host supports SIZE extension, this is added to the MAIL FROM: command. Extend "b" option to include a second value which is the maximum message size this server is willing to accept. For example, a value of "10/1000000" says that there must be ten blocks free, and sendmail will reject any message larger than one megabyte. Some portability hooks for NeXT (this could be applicable to Mach in general). You have to create an empty file called "unistd.h" to get it to compile. Adjust config values (MAXLINE, MAXATOM, and PSBUFSIZE) to be more generous. Add X400-Received: to the list of headers tagged with H_TRACE in conf.c. From Bill King, Allen-Bradley Co. 6.54/6.25 93/04/19 Fix problem that caused redefinition of SMTP and QUEUE compile flags. Pointed out by Jon Forrest of the Sequoia 2000 project at Berkeley. Properly handle \! hack -- it was treating host\!user as one token (host!user) instead of three (host, !, user). Fix from Eric Wassenaar of NIKHEF-H. Fix compilation problem in getauthinfo() if IDENTPROTO is off. Turn off DEFNAMES and DNSRCH when getting the hostsignature (i.e., MX records) in level 1 configuration files; this matches the old behaviour. From Motonori Nakamura of Kyoto University. Improve error message printing -- if sent through an alias, error messages include the name of the alias in the message. Unfortunately, in order to make this work properly in queue runs, this changes the format of the C line in the qf file. The relatively uselessness of the previous information was pointed out to me by Allan E Johannesen of WPI. Add XLA compile flag to add hooks to Christophe Wolfhugel's extended load average code. This is still in very early form. For information regarding the guts of the xla code, contact Christophe.Wolfhugel@grasp.insa-lyon.fr. Additional hooks for detecting tempfails in rewriting rules (that is, in map lookups). 6.53/6.25 93/04/15 Properly diagnose ruleset zero returning null (instead of a mailer triple). From Motonori Nakamura of Kyoto University. More generalization of socket code for other protocols. Shorten timeouts on reverse name lookups -- since they are done during connection establishment, long timeouts here can cause higher level timeouts. This mainly serves to accept mail from hosts that do not have proper reverse (PTR) DNS records set up. Reset e_statmsg before each mailer invocation to avoid bogus messages in the log. Redefine $r, $s, and $_ in error envelopes so you don't get incorrect cruft in the error message. Problem noted by Motonori Nakamura of Kyoto University. Fix a problem that can cause failure to return errors to Postmaster in certain cases. From Motonori Nakamura. Fix a problem that can cause some systems to give duplicate error messages when a bad syntax address such as " $3 the input "user@a.b.c" failed instead of being properly rewritten as "user@a..c". Neil also convinced me that it was correct that $~ should match only one token -- the problem is that it's always possible to add another token, so $~ matches far too eagerly. 6.45/6.21 93/03/25 Implement multi-word classes (properly!). 6.44/6.21 93/03/25 Add X-Authentication-Warning: headers to clue users into possible attempts to forge mail. This is on the authwarnings privacy flag, but is the default. Suggested by Bryan Costales of ICSI. Pass default units for convtime in so they can be more reasonable. Allow config files to always add a new Comments: header (i.e., they will be added even if an old one already exists). Suggested by Bryan Costales of ICSI. Allow config files to delete an existing Return-Path: header. These should only be added at final delivery. Suggested by Bryan Costales of ICSI. Some debugging additions. Suggested by Bryan Costales of ICSI. Clean up logging of Family 0 addresses. Noted by David Muir Sharnoff and others. Add a "dequote" map class. This allows config files to strip quotes off of addresses. Note that this is not a builtin map, just a class -- so you have to define the map using the K line. Fix a bug in the queueup() loop getting a locked tf where in very odd cases it can fall off the bottom and core dump. Of course, it was P{r Emanuelsson who found it.... Open a new transcript when splitting an envelope. Problem found by Allan E Johannesen of WPI. Improved error output in endmailer if the mailer core dumps. CONFIG: Fix typo in UUCP mailer definition. CONFIG: Default several of the new options on: eight bit input, privacy flags set to "authwarnings", and message warning set to 4h. CONFIG: Use dequote map. 6.43/6.20 93/03/23 Fix problem with assumption of an sa_len field in a generic sockaddr -- it turns out that most vendors haven't picked up this (very important) fix. Change compilation flags for daemon code -- select one or both of NETINET or NETISO, but don't ever set DAEMON manually. CONFIG: add FEATURE(mailertable) to do IDA-style mailertables. 6.42/6.19 93/03/19 Use Postmaster as default fallback return address, not root. POSIX changes for file descriptor handling. Diagnose errors writing new queue file. If you change the owner using an owner- alias, also change the error mode to EM_MAIL so that errors don't get dropped into an inappropriate directory. Problem noted by Allan E Johannesen of WPI. If you are su'ed to root, send email as who you really are, not as root. From Brian Kantor of U.C. San Diego. Allow warning messages to be sent after a configurable interval has passed without delivery. The message is sent only once per envelope. This changes the format of the qf file to have an F line, and the format of the T option to accept take the format "return/warn" (both intervals). Don't force all local names to lower case -- this was left over from the wierd handling of case mapping on aliases. It is now driven (as expected) by the "u" mailer flag. Problem noted by P{r Emanuelsson. Fix problem that caused headers on returned email to be trashed; they were getting freed, but are still accessible via BlankEnvelope. Fix problem that caused bogus ids to be created on returned mail. Add support for ISO and other non-INET networking. This is by no means finished yet. This does assume a lot of other system support, like a version of gethostbyname that returns non-AF_INET addresses. CONFIG: change default on prog mailer to keep upper case in user names (i.e., in the program command line). CONFIG: strip trailing dots off of hosts in uucp mailer before convert to bang format. CONFIG: create new "relay" mailer for $R (LOCAL_RELAY) and $H (MAIL_HUB) delivery that doesn't add local domain. Note that this violates 821, but is probably "more correct" for what we are trying to do. Problem pointed out by Michael Graff of Iowa State. 6.41/6.18 93/03/18 Clean up unnecessary creates of queue ids (i.e., empty qf files) when not needed, such as when starting up an SMTP connection. Fix problem where split envelopes aren't instantiated in the queue. This is quite a serious bug. Owner- aliases had problems with leading spaces causing a premature delimitation. 6.40/6.18 93/03/18 Have ending 250 (after DATA) include the id; suggested by Brian Kantor of UC San Diego. Add logging on envelope splitting. Change queue ids to have one more letter encoding the hour of the day so that during a single day there is a greater likelihood of uniqueness; requested by Brian Kantor. 6.39/6.18 93/03/18 Fix minor compile problem if LOCKF is defined. Define size of tobuf in conf.h. Observed by Toshinari Takahashi of Toshiba. Restore e_sender -- this is equivalent to e_from.q_paddr without decorations such as angle brackets and comments. OSF/1 on Alpha changes from Allan E Johannesen of WPI. CONFIG: fix typo in S3 for list syntax (;: => :;). Thanks to Christopher Hoover for noting the problem. 6.38/6.17 93/03/17 Pass envelope to disconnect to avoid another use of CurEnv, which can apparently end up being null at inopportune times. Log "received from" as "relay=" for consistency (suggested by John Gardiner Myers). Fix major bug in header handling: if no From: line existed in the header (so sendmail inserts one), and the sender is an alias that has an owner, the From: line shows the owner (as well as the envelope). Fixed by early binding the headers (which will change debugging output). HPUX portability patches from Michael J. Corrigan of UC San Diego. Some attempts to adapt better to out of open file conditions. Some changes to ctladdr handling in queue files. 6.37/6.17 93/03/16 MAJOR CHANGE: delete e_sender and e_returnpath (why are these different from e_from?) and $< macro. Log correct IP address in relay= field even if the connection times out. Log "received from [RESPONSE]" on EF_RESPONSE messages (from John Gardiner Myers). Fixes to SysExMsg logging (sometimes just got "message: %s" instead of "message: error message"), noted by Eric Wassenaar. Also reported by Motonori Nakamura. Improvements to MX piggybacking code, from Motonori Nakamura. Fix case where CurHostName points to an auto variable that has been deallocated (from Motonori Nakamura). Fix bug causing newlines to be included in aliases if option "n" (check alias RHS) is set; bug noted by David Muir Sharnoff. Fix problem causing user names that should be mapped to lower case to not be mapped if they are sent during a queue run. This greatly simplifies the case mapping code. Problem noted by Allan E Johannesen of WPI. Don't do recipient address rewriting in buildaddr. This improperly did recipient rewriting on sender addresses, and just seems bogus in general -- but the change could break some .cf files. Pass TZ envariable to child processes for System V. CONFIG: allow LOCAL_RULE_1 and LOCAL_RULE_2 if you want to define those rulesets. KNOWN PROBLEM: I have seen some problems on SunOS that causes the User Data Base to give errors on some addresses. I have tracked the problem back at least as far as 93.02.15 (version 6.22). Running with debugging on makes it go away, so I conclude that it is referencing uninitialized stack data. I haven't been able to track this down yet. 6.36/6.16 93/03/08 Allow local mailer to specify $@host -- this lets you assign the "foo" part of jgm+foo to $h for passing in to the local mailer. Additional debug printing in getcanonname (show query type). Don't add the e_fromdomain on sender addresses -- this interacts wierdly with the owner- code. Improve delivery logging to not log obvious or meaningless stuff. Include numeric IP address in Received: lines per RFC 1123 section 5.2.8. Fixed a bug in checking stat() return value if restrictmailq is set. Also, check the entire group set instead of just the primary group. Both from John Gardiner Myers. Don't have usrerr automatically print errno, since this is often misleading. Use transienterror() in makeconnection after connect() fails and in openmailer after execve() fails (from Eric Wassenaar). Also moved transienterror() from util.c to conf.c. Clean up from= logging on response messages. Undo patch allowing prescan to return a null vector -- it breaks too many things. Config: FEATURE(notsticky) lets you use UDB for everything coming in to the machine, even if it is specifically targetted to this machine. Without it, UDB is bypassed if the user name is fully qualified. Config: fix another minor botch with <> (local mailer wasn't mapping them properly). 6.35/6.15 93/03/05 Fix getrealhostname to return null if sinlen <= 0 -- this can occur if stdin is a pipe. Avoid infinite loop in getcanonname if name server return NO_DATA (for example). Config: avoid having C flag qualify list syntax and error syntax. 6.34/6.14 93/03/05 Fix logging in deliver to not pass too many parameters to Ultrix versions of syslog. Don't write the pid file until after the daemon has actually opened and conditioned the connection. Consider addresses "different" if their q_uids differ (so that two users forwarding to the same program will be seen as different, rather than the same). Fix problem with bad parameters in main() -- they set ExitStat but don't exit. Fix null pointer references through RealHostName -- painfully discovered by Allan E Johannesen of WPI. Fix bug causing user@@localhost to core dump (yuch). Config: don't put two @host.dom.ain on users in $=E in SMTP mailer. Also, catch user@ (no host) in ruleset 0. 6.33/6.13 93/03/03 Config: add confCW_FILE as the name of the cw configuration file (defaults to /etc/sendmail.cw). From P{r Emanuelsson. Allow prescan to return a pointer to an empty list -- this is not an error. Also, clean up error reporting to avoid double errors (prescan reports once, then the caller reports again). Changes to avoid trusting T_ANY queries -- run them, but if you don't get the info you expected, do T_A and T_MX queries anyhow. This also fixes an oversight where _res.options bits were being ignored. If PRIV_NOVRFY is set, use 252 response code instead of 502 per RFC 1123 section 5.2.3. It's not 100% clear that this is correct, but it probably works better with stupid mailers that do a VRFY and only check the first digit. 6.32/6.12 93/03/02 Fix uninitialized variable "protocol" in smtp code. Include in sendmail.h -- move towards POSIX/ANSI. Additional hooks for RFC 1427 (ESMTP SIZE extension). This includes requiring that enoughspace() know the system block size, which will undoubtedly break most ports. Trace flag 19 in use for srvrsmtp.c. Additional logging -- notably the sending mailer name. This also changes the delivery logging to strict field=value syntax. Fix some problems with messages getting sent even to addresses that had been marked bad -- from Eric Wassenaar. More WIDE changes: accept host name inside [...] as non-MXed host. This is intended ONLY for use inside firewalled environments, where the MX points at the gateway. Change .cf file conventions so that mapping for <> addresses don't have an @ in them (to avoid confusing the C mailer flag). Pointed out by Neil Rickert. Config extensions for Sam Leffler's FlexFAX software. 6.31/6.10 93/02/28 Fix some more bugs in alias owner code -- there were some wierd cases where an error in a non-aliased name would override the return info in an aliased name with an owner. Changes from WIDE Project, forwarded to me by Motonori Nakamura: Log actual delivery host (after MX et al); from yasuhiro@dcl.co.jp. Log daemon startup. Deliver Postmaster copies without a body. Better logging of SMTP senders. Send all program email as daemon even when local. As requested in various forms from many people, accept -qIstring to limit queue runs to jobs with queue-id matching string. Similarly for -qRstring for recipients, -qSstring for senders. Initial hooks for ESMTP support (see RFC 1425). Fixed a syntax error in the UUCP mailer specification that caused core dumps on startup. Check for missing A= or P= arguments in mailer definitions. 6.30/6.10 93/02/27 Require FROZENCONFIG compilation flag to include frozen configuration code. Frozen configuration is really not a very good idea any more, particularly in shared library environments. Do better checking of errno after opens of :include: and .forward files to defer delivery on network and other transient errors. Suggestion from Craig Everhart. Fix minor botch in read timeout macro processing. Add FEATURE(nouucp) to config files for sites that know absolutely nothing about UUCP. Add built cf files to distribution tape and clarify how to build them if you don't have the Berkeley make. Some sizeof(long) portability changes for the Alpha, from Allan E Johannesen. Add "restrictmailq" privacy flag -- if set, only people in the same group as your queue directory can print the queue. If you set this, be sure you also restrict access to log files.... Fix another bug in owner-list stuff that can cause data files to be "lost". Fix a bug with queue runs that cause forwards to yourself to go into alias/forwarding loops. I'm still iffy about this fix. Fix from Eric Wassenaar for suppression of return message code. 6.29/6.9 93/02/24 Fix yet another problem in alias owner code -- put the wrong return address on the enclosed return-to-sender letter. 6.28/6.9 93/02/24 Fix botch in alias owner code that caused it to not operate if the error was detected locally. 6.27/6.9 93/02/24 M_LOCAL => M_LOCALMAILER to avoid conflict with Ultrix include file . Miscellaneous bug fixes from Eric Wassenaar: sendmail -bv -t logs the from line even though in verify mode only. sendmail -v can go into queue mode if shouldqueue returns TRUE. Add route-addr pruning per RFC 1123 section 5.3.3. This can be disabled using the "R" option. Delete (always undocumented) -R flag (save original recipients); there are ways to syslog(3) these now. Clean up SMTP reply codes -- specify them as needed in the code, instead of in conf.c -- this was needed during the NCP to TCP transition, but seems silly now. This also changes parameters to message and nmessage. Have mailstats read the .cf file to find the sendmail.st file and get text versions of mailer names. An initial version of this code was provided by Tuominen Keijo (although the comments indicate the good bits were written by "E.V."). Add yet more System V compatibility hacks. Fix bug in VRFY code (assumes everything must be a local user). Allow specification of any of the hard-wired pathnames in the Makefile. Delete concept of "trusted users" -- this really didn't provide any security anyway, and caused some problems. Delete last vestige of support for the word "at" as an equivalent to the character "@". Propagate owner-foo alias information into the envelope sender. Based on code from John Gardiner Myers. This is a major semantic change -- beware! Allow $@ on LHS to indicate "match zero" -- this is used to match the null expression. 6.26/6.8 93/02/21 Don't "lose" queue runs. Very important fix from (who else?) Eric Wassenaar. Completely reset state on RSET command -- from Eric Wassenaar. Send error messages and return receipts using an envelope sender of <> regardless of the setting of $n. Rewriting rules can undo this if they feel the necessity, as might be needed for networks that don't understand the syntax. This is permitted by RFC 821 section 3.6 and required by RFC 1123 section 5.3.3. THIS REQUIRES VERSION 4 CONFIG FILES because the rulesets must be able to parse <> properly. Don't ever send error messages to "<>" -- they will get sent to the local postmaster or dumped in /usr/tmp/dead.letter instead. Per RFC 1123 section 5.3.3. Explicitly check for email to yourself as a dotted quad. You have to call $[ [ ... ] $] to get this. Up the message timeout to five days per RFC 1123 section 5.3.1.1. Make all read timeouts individually configurable, as strongly recommended by RFC 1123 section 5.3.2. Use f_bavail (blocks available to regular users) instead of f_bfree (blocks available to superuser) in free block checks. Change $d macro to be the current time, not the origination time, since this is consistent with how it is used now. Generalization of enoughspace from Eric Wassenaar covering SGI, Apollo, HPUX, Ultrix, and SunOS. Ignore process group signals -- some front ends can do this if you kill a window too quickly. From Eric Wassenaar. Change umask to 022. 6.25/6.8 93/02/20 Close all cached connections before calling mailers and after forking for delivery (caused double closes which resulted in false errors). Add FEATURE(redirect) in config files -- this allows you to alias old addresses to a pointer to the new address that will give a 551 error message, but not deliver the mail. Some code changes to make the 551 errors look pretty. Names of M4 program paths in config files have changed -- they are all XXX_MAILER_PATH now, to match XXX_MAILER_FLAGS. Fix a bug in the QSELFREF code having to do with empty .forward files, reported by Eric Wassenaar. Add option "p" (privacy flags); this allows you to tune how picky the SMTP server will be. This also adds the confPRIVACY_FLAGS M4 macro in the config files. Add option "b" (minimum blocks free). If there are fewer than this number of blocks free on the filesystem containing the queue directory, the SMTP MAIL command will return a 452 response and ask you to try again later. This also adds the confMIN_FREE_BLOCKS M4 macro in the config files. Made VRFY just verify (doesn't expand aliases and .forward files); EXPN does full expansion. RCPT in queue-only mode also doesn't chase aliases and .forward. 6.24/6.7 93/02/19 Increase the number of domain search entries in domain.c to allow for the extra "" entry indicating the root domain. Reported by Motonori Nakamura of Kyoto U. Add a "SMART_HOST" in the configs for UUCP-connected sites that want to forward all mail with extra "@"s to that site. Also allows SMART_HOST, LOCAL_RELAY, and MAIL_HUB to be specified as ``mailer:hostname'' to use an alternate mailer. Clarified and updated some wording in the Operations Guide. Add the "c" mailer flag -- this suppresses all comment parts of addresses (requested by John Curran of NEARnet). Have -v print prompts in -bt mode even if stdin is not a terminal (default behaviour is to be silent if not reading from a terminal). Suggested by Bryan Costales, ICSI. Move the metacharacters from C0 space (\001-\037) into C1 space (\201-\237). This also fixes a bunch of potential bugs with G1 characters (\240-\276) in headers relating to negative numbers passed to isspace() et al. Add YP_LAST_MODIFIED and YP_MASTER_NAME to DBM version of alias database if YPCOMPAT is #defined. Enhancement from Takahiro Kanbe of Fuji Xerox Information Systems Co., Ltd. Add "list" Precedence (-30); this can be used with old sendmails which will map to precedence 0 (which will return error messages). Suggested by Stephen R. van den Berg. Many bug fixes from Eric Wassenaar of the National Institute for Nuclear and High-Energy Physics, Amsterdam: Clear timeouts properly on open failures in include(). Don't dereference through NULL if no home directory found. Re-establish SIGCHLD signal on System 5 in reapchild(). Avoid NULL pointer reference on -pFOO flag. Properly handle backslash escapes in comments. Correctly check reply status on SMTP NOOP command. Properly save SMTP error message if peer gives "Service Shutting Down" message. Avoid writing to the transcript if it couldn't be opened. Signal errors in SMTP children to parent properly. Handle self references in a list more globally (include a QSELFREF bit in the address flags). This enhancement was suggested by Eric Wassenaar. Use initgroups() in hpux, even though it's System-V based. The HASINITGROUPS compile flag can set this on other systems. This HPUX behaviour was pointed out by Eric Wassenaar. 6.23/6.6 93/02/16 Clean up handling of LogLevel to make it easier to figure out what's on what level. Change log levels to have some consistency: 1 serious system failures, security problems 2 lost communications, protocol failures 3 other serious failures 4 minor errors 5 message collection 6 vrfy logging, creation of return-to-sender 7 delivery failures 8 delivery successes 9 delivery tempfails (queue ups) 10 database expansion >64 debugging Allow IDA-style separated processing on S= and R= in Mailer definition lines. Note that rulesets 1 and 2 are still used for both addresses as before. Bruce Lilly gave a convincing argument that RFC976 insists on this behaviour. Added some time zones to arpatounix -- they may not be in the standards, but they are in use. However, I may delete arpatounix entirely -- there appears to be no reason for it to exist. Change to UUCP mailer (in cf directory) to try to do a saner job. I'm still not certain about this mailer in general. 6.22/6.5 93/02/15 Fix bug that prevents saving letters in ~/dead.letter. Don't add angle brackets in VRFY command if angle brackets already exist in the address. Fix bogus error message in udbexpand. Null terminate host buffers in buildaddr (broken in 6.21) -- IMPORTANT FIX!! 6.21/6.5 93/02/15 Fix another incorrect error message in alias.c, found by Azuma Okamoto. Fix a couple of problems in the more-configurable config files, found by Tom Ivar Helbekkmo. Fix problem with quoted :include: entries. Don't duplicate the filename on verbose printing of .forward and :include: contents. Extend size of prescan buffer (to allow bigger addresses). Also, detect some buffer overflows. Log user SMTP protocol errors (log level 4). 6.20/6.4 93/02/14 Fix another problem in the MCI state machine caused when there were errors generated from the other end to commands other than RCPT. 6.19/6.4 93/02/14 Include load average support for DEC Alpha running OSF/1. Fix multiple-response problem with errors in MAIL From: line. Fix SMTP reply codes for invalid address syntaxes (give 501; never give multiple error messages for a single message). Fix problem where a cached connection timeout rejects all later connects to that host. Fix incorrect error message if alias.c is compiled with DBM only. Additional changes to fix nested conditionals (from Bruce Lilly). Recover more gracefully from operating system failures, particularly NULL returns from openmailer (from Noritoshi Demizu, OMRON Corporation). Log forward, alias, and userdb expand operations on log level 10; concept suggested by P{r (Pell) Emanuelsson. Changes for HPUX 8.07 compatibility. 6.18/6.4 93/02/12 Allow any config option to be set using an M4 define. Change UNAME compile flag to HASUNAME for IDA compatibility (besides, it's a better name). Note in README that on SunOS it must be linked -Bstatic. Fairly major change in domain.c to handle wildcard MX records more rationally. NOTE: the "w" option (no wildcard MX records match local domain) has been eliminated. Fix some unset variable references pointed out by Bruce Lilly. Fix host name in process titles when using cached connection. 6.17/6.3 93/01/28 Fix System 5 compatibility changes to be compatible with the rest of the world. 6.16/6.3 93/01/28 Experimental fix for problem handling errors in the SMTP protocol in conjunction with connection caching. System 5 compatibility changes. 6.15/6.3 93/01/26 Fix a bug that causes local mail delivered using -odq to be eliminated as a duplicate (because it matched the ctladdr, now passed in as a C line). These changes are pretty tricky...... 6.14/6.3 93/01/25 Add debugging for some MCI errors. 6.13/6.3 93/01/22 Fix -e compatibility flag to take a value. Fix a couple of minor compilation warnings on Sun cc. Improve error messages in a few cases to be more self-explanatory. 6.12/6.3 93/01/21 Fix yet-another problem with environment handling, pointed out by Yoshitaka Tokugawa and Tom Ivar Helbekkmo. Some heuristics to try to limit resource exhaustion problems if a downstream host has been down for a long time. Fix problem with incorrect host name being logged in "Connection timed out" messages (from Tom Ivar Helbekkmo). Fix some ANSI C problems (from Takahiro Kanbe). Properly log message sender on returned mail during queue run. Count number of recipients properly. Fix a problem in yp map code. Diagnose "message timed out" (from Motonori Nakamura). 6.11/6.3 93/01/20 Fix problem with address delimitor inside quotes. Define $k and $=k to be the UUCP name (from the uname call) based on code from Bruce Lilly. 6.10/6.2 93/01/18 Implement arpatounix (largely code from Bruce Lilly). Log more info (suggested by John Myers). Allow nested $?...$|...$. (inspired by code from Bruce Lilly of Sony US). POSIX compatibility (noted by Keith Bostic). Handle SMTP MAIL command errors properly (urged by several people, notably John Myers of CMU). Do early diagnosis of .cf errors (notably referencing a RHS substitution that isn't on the LHS). Adjust checkpointing to better handle batched recipients, suggested by John Myers. Fix miscellaneous bugs. (config files:) Implement MAIL_HUB for all local mail (to handle NFS-mounted directories) as urged by Tom Ivar Helbekkmo of the Norwegian School of Economics. 6.9/6.1 93/01/13 Environment handling simplification/bug fix -- child processes get a minimal, fixed environment. This avoids different behaviour in queue runs. Handle commas inside comments properly. Properly limit large messages submitted in -obq mode. 6.8/6.1 93/01/10 Check mtime of thaw file against .cf and sendmail binary, based on code from John Myers. 6.7/6.1 93/01/10 MX piggybacking, based on code from John Myers@CMU. Allow checkcompat to return -1 to mean tempfail. Bug fix in m_mno computation. 6.6/6.1 93/01/09 Tuning of queueing functions as recommended by John Gardiner Myers. Return mail headers (no body) on messages with negative precedence. Minor other bug fixes. 6.5/6.1 93/01/03 Fix botch causing queued headers to have ?XX? prefixes. 6.4/6.1 93/01/02 Changes to recognize special mailer types (e.g., file) early. 6.3/6.1 93/01/01 Pass timeouts to sfgets. Check for control characters in addresses. Fixed deferred error reporting. Report duplicate aliases. Handle mixed case recursive aliases. Misc bug fixes. 6.2/6.1 92/12/30 Put return-receipt-to on a conf.c flag (but don't set it). Fix minor syslog problem.