#!/bin/sh
#
# Copyright 1993, 1994 Patrick Volkerding, Moorhead, Minnesota USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is 
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

# Wed, 27 Apr 1994 00:06:50 -0700 (PDT)
# Optimization by David Hinds.

CUSTOM=""
if [ -r /tmp/custom ]; then
 CUSTOM="`cat /tmp/custom`"
fi
SOURCE_DIR=/var/log/mount
umask 000
ASK="tagfiles"
if [ ! -d /usr/sbin ]; then # we must be on the bootdisk
 TARGET_DIR=/mnt
 TMP=/mnt/tmp
 if mount | fgrep "on /mnt" 1> /dev/null 2> /dev/null ; then # good
  echo > /dev/null
 else # bad
  echo
  echo
  echo "You can't run pkgtool from the rootdisk until you've mounted your Linux"
  echo "partitions beneath /mnt. Here are some examples of this:"
  echo
  echo "If your root partition is /dev/hda1, and is using ext2fs, you would type:"
  echo "mount /dev/hda1 /mnt -t ext2"
  echo
  echo "Then, supposing your /usr partition is /dev/hda2, you must do this:"
  echo "mount /dev/hda2 /mnt/usr -t ext2"
  echo
  echo "Please mount your Linux partitions and then run pkgtool again."
  echo
  exit
 fi
 if [ ! -d $TMP ]; then
  mkdir -p $TMP
  chmod 1777 $TMP
 fi
else
 TARGET_DIR=/
 TMP=/tmp
fi
ADM_DIR=$TARGET_DIR/var/log

keep_files() {
 while read FILE ; do
  if [ -f "$TARGET_DIR/$FILE" ]; then
    echo "  --> $FILE was found in another package. Skipping."
  fi
 done
}

keep_links() {
 while read LINK ; do
  echo "Duplicate link. Not executing: $LINK"
 done
}

delete_files() {
 while read FILE ; do
  if [ -f "$TARGET_DIR/$FILE" ]; then
    echo "  --> Deleting $FILE"
    rm -f $TARGET_DIR/$FILE
  fi
 done
}

delete_links() {
 while read LINK ; do
  echo "Unique link. Executing: $LINK"
 done
}

# Conversion to 'comm' utility by Mark Wisdom.
# is pretty nifty! :^)
remove_packages() {
 for package_name in $1 
 do
  echo
  if [ -r $ADM_DIR/packages/$package_name ]; then
   echo "Removing package $package_name..."
   echo
   if fgrep "./" $ADM_DIR/packages/$package_name 1> /dev/null 2>&1; then
    TRIGGER=".\/"
   else
    TRIGGER="FILE LIST:"
   fi
   echo "Removing files:"
   sed -n "/$TRIGGER/,/^$/p" < $ADM_DIR/packages/$package_name | sort -u > $TMP/delete_list
   # Pat's new-new && improved pre-removal routine.
   for DIR in $ADM_DIR/removed_packages $ADM_DIR/removed_scripts ; do
    if [ ! -d $DIR ] ; then mkdir -p $DIR ; chmod 755 $DIR ; fi
   done
   mv $ADM_DIR/packages/$package_name $ADM_DIR/removed_packages 1> /dev/null 2>&1
   if [ -r $ADM_DIR/scripts/$package_name ]; then
    cat $ADM_DIR/scripts/$package_name | fgrep 'rm -rf' | sort -u > $TMP/del_link_list
    mv $ADM_DIR/scripts/$package_name $ADM_DIR/removed_scripts 1> /dev/null 2>&1
    cat $ADM_DIR/scripts/* | fgrep 'rm -rf' | sort -u > $TMP/required_links
    comm -12 $TMP/del_link_list $TMP/required_links | keep_links
    comm -23 $TMP/del_link_list $TMP/required_links | delete_links
    comm -23 $TMP/del_link_list $TMP/required_links > $TMP/delscript
    ( cd $TARGET_DIR ; sh $TMP/delscript )
    rm -f $TMP/del_link_list $TMP/required_links $TMP/delscript
   fi
   cat $ADM_DIR/packages/* | sort -u > $TMP/required_files
   comm -12 $TMP/delete_list $TMP/required_files | keep_files
   comm -23 $TMP/delete_list $TMP/required_files | delete_files
   rm -f $TMP/delete_list $TMP/required_files
  else
   echo "No such package: $package_name. Can't remove."
  fi
 done
}

# Here, we read the list of arguments passed to the pkgtool script.
if [ $# -gt 0 ]; then # there are arguments to the command
 while [ $# -gt 0 ]; do
  case "$1" in
  "-sets")
   DISK_SETS=`echo $2 | tr "[A-Z]" "[a-z]"` ; shift 2 ;;
  "-source_mounted")
   SOURCE_MOUNTED="always" ; shift 1 ;;
  "-ignore_tagfiles")
   ASK="never" ; shift 1 ;;
  "-source_dir")
   SOURCE_DIR=$2 ; shift 2 ;;
  "-target_dir")
   TARGET_DIR=$2
   ADM_DIR=$TARGET_DIR/var/log
   shift 2 ;;
  "-source_device")
   SOURCE_DEVICE=$2 ; shift 2 ;;
  esac
 done
else  # there were no arguments, so we'll get the needed information from the
      # user and then go on.
 CMD_START="true"
 cat << EOF

Welcome to the Slackware package tool (pkgtool v. 2.3.0-tty).

EOF
 while [ 0 ]; do
  echo -n "Would you like to [i]nstall or [r]emove packages? "
  read REPLY;
  if [ "$REPLY" = "r" -o "$REPLY" = "R" ]; then
   echo 
   echo "You have installed these packages:"
   ls $ADM_DIR/packages
   echo 
   echo -n "Remove which packages? "
   read REMOVAL_LIST;
   remove_packages "$REMOVAL_LIST"
   echo 
   echo "Packages removed."
   chmod 755 /
   chmod 1777 /tmp
   exit
  elif [ "$REPLY" = "i" -o "$REPLY" = "I" ]; then
    echo
   echo -n "Install from [c]urrent directory, [o]ther directory, or [f]loppy? " 
   read REPLY;
   echo
   if [ "$REPLY" = "f" -o "$REPLY" = "F" ]; then
    cat << EOF
Install from:

  1 -- /dev/fd0 (drive 1)
  2 -- /dev/fd1 (drive 2)

EOF
    echo -n "Source drive? "
    read REPLY;
    if [ "$REPLY" = "1" ]; then
     SOURCE_DEVICE="/dev/fd0"
    elif [ "$REPLY" = "2" ]; then
     SOURCE_DEVICE="/dev/fd1"
    else
     echo "Not a proper choice. Bye bye!"
     exit 
    fi
    cat << EOF

Enter the names of any disk sets you would like to install.
Seperate the sets with a space, like this: a b oi x

To install packages from one disk, hit [enter] without typing
anything.

EOF
    echo -n "Disk sets ==> "
    read DISK_SETS;
    if [ "$DISK_SETS" = "" ]; then
     DISK_SETS="disk"
    else
     DISK_SETS=`echo $DISK_SETS | sed 's/ /#/g'`
     DISK_SETS="#$DISK_SETS"
    fi
    break;
   elif [ "$REPLY" = "o" -o "$REPLY" = "O" ]; then
    echo
    echo "What directory would you like to install"
    echo -n "packages from? " 
    read SOURCE_DIR;
    SOURCE_MOUNTED="always"
    DISK_SETS="disk"
    chmod 755 $TARGET_DIR
    chmod 1777 $TARGET_DIR/tmp
    break;
   elif [ "$REPLY" = "c" -o "$REPLY" = "C" ]; then # installing from current directory
    SOURCE_MOUNTED="always"
    SOURCE_DIR="$PWD"
    DISK_SETS="disk" 
    chmod 755 $TARGET_DIR
    chmod 1777 $TARGET_DIR/tmp
    break;
   fi
  fi 
 done
fi
if [ "$DISK_SETS" = "disk" ]; then
 ASK="always"
fi

for DIR in $ADM_DIR $ADM_DIR/packages $ADM_DIR/scripts $ADM_DIR/disk_contents
do
 if [ ! -d $DIR ]; then mkdir -p $DIR ; chmod 755 $DIR ; fi
done

if [ ! -d $ADM_DIR/mount -a ! -L $ADM_DIR/mount ]; then
 mkdir -p $ADM_DIR/mount ; chmod 755 $ADM_DIR/mount
fi

mount_the_source() {
 # is the source supposed to be mounted already?
 if [ "$SOURCE_MOUNTED" = "always" ]; then
  # The source should already be mounted, so we test it
  if [ ! -d $SOURCE_DIR ]; then # the directory is missing
   cat << EOF

Your source device cannot be accessed properly.

Please be sure that it is mounted on /var/log/mount, and that
the Slackware disks are found in subdirectories of
$SOURCE_DIR like specified.
EOF
   exit 1;
  fi
  return 0;
 fi
 echo 
 if [ ! "$1" = "single_disk" ]; then
  echo "Please insert disk $1 and press [enter] to continue, [s] to skip this"
  echo -n "series, or [q] to quit installing software altogether. " 
 else
  echo "Please insert disk to install packages from and press [enter], or"
  echo -n "type [q] to abort. "
 fi
 read REPLY;
 echo 
 if [ "$REPLY" = "s" ]; then
  return 1;
 fi
 if [ "$REPLY" = "q" ]; then
  if [ "$DISK_SETS" = "disk" ]; then
   echo "Aborting..."
   echo 
  else
   cat << EOF
Aborting software installation and skipping ahead
to boot disk creation. Press control-c if you want
to exit the installation program completely.

EOF
  fi
  chmod 755 $TARGET_DIR
  chmod 1777 $TARGET_DIR/tmp
  exit 1;
 fi;
 # Old line:
 # mount -r -t msdos $SOURCE_DEVICE $SOURCE_DIR
 # New ones: (thanks to Andy Schwierskott!)
 go_on=y
 not_successfull_mounted=1
 while [ "$go_on" = y -a "$not_successfull_mounted" = 1 ]; do
    mount -r -t msdos $SOURCE_DEVICE $SOURCE_DIR
    not_successfull_mounted=$?
    if [ "$not_successfull_mounted" = 1 ]; then
       mount_answer=x
       while [ "$mount_answer" != "y" -a "$mount_answer" != "q" ] ; do
          echo -n "Media couldn't be mounted. Retry [y] or quit [q]? "
          read mount_answer
       done
       go_on=$mount_answer
    fi
 done
 test $not_successfull_mounted = 0
}
umount_the_source() {
 if [ ! "$SOURCE_MOUNTED" = "always" ]; then
  umount $SOURCE_DEVICE 1> /dev/null 2>&1
 fi;
}
# The function below installs the package with the name $CURRENT_PACKAGE_NAME
# and with the DOS file extension $CURRENT_PACKAGE_EXTENSION.
install_the_current_package() {
# we probably want to use thes  next 2 to delete the old package correctly, i
# but we'll leave implementing that for later...
 rm -f $ADM_DIR/removed_packages/$CURRENT_PACKAGE_NAME
 rm -f $ADM_DIR/removed_scripts/$CURRENT_PACKAGE_NAME
 echo "PACKAGE NAME:     $CURRENT_PACKAGE_NAME" > $ADM_DIR/packages/$CURRENT_PACKAGE_NAME
 KSIZE=`expr $PACKAGE_SIZE / 1024`
 echo "PACKAGE SIZE:     $KSIZE K" >> $ADM_DIR/packages/$CURRENT_PACKAGE_NAME
 BASE_DISK_NAME=`basename $PACKAGE_DIR/disk*`
 echo "PACKAGE LOCATION: $BASE_DISK_NAME" >> $ADM_DIR/packages/$CURRENT_PACKAGE_NAME
 echo "PACKAGE DESCRIPTION:" >> $ADM_DIR/packages/$CURRENT_PACKAGE_NAME
 if [ -r $PACKAGE_DIR/$BASE_DISK_NAME -a ! -d $PACKAGE_DIR/$BASE_DISK_NAME ]; then
  fgrep "$CURRENT_PACKAGE_NAME:" $PACKAGE_DIR/$BASE_DISK_NAME >> $ADM_DIR/packages/$CURRENT_PACKAGE_NAME 2> /dev/null
 fi
 echo "FILE LIST:" >> $ADM_DIR/packages/$CURRENT_PACKAGE_NAME
 # Pat's new-new pre-install cleanup routine.
 for DIR in $ADM_DIR/removed_packages $ADM_DIR/removed_scripts ; do
  if [ ! -d $DIR ] ; then mkdir -p $DIR ; chmod 755 $DIR ; fi
 done
 mv $ADM_DIR/packages/$CURRENT_PACKAGE_NAME $ADM_DIR/removed_packages 1> /dev/null 2>/dev/null
 if [ -r $ADM_DIR/scripts/$CURRENT_PACKAGE_NAME ]; then
  cat $ADM_DIR/scripts/$CURRENT_PACKAGE_NAME | fgrep 'rm -rf' | sort -u > $TMP/del_link_list
  mv $ADM_DIR/scripts/$CURRENT_PACKAGE_NAME $ADM_DIR/removed_scripts 1> /dev/null 2>&1
  cat $ADM_DIR/scripts/* | fgrep 'rm -rf' | sort -u > $TMP/required_links
  comm -23 $TMP/del_link_list $TMP/required_links > $TMP/delscript
  ( cd $TARGET_DIR ; sh $TMP/delscript )
  rm -f $TMP/del_link_list $TMP/required_links $TMP/delscript
 fi
 echo "Installing package $CURRENT_PACKAGE_NAME... "
 if [ "$CURRENT_PACKAGE_EXTENSION" = ".tar" ]; then
  (cd $TARGET_DIR; tar -xlpvf - ) < $PACKAGE_DIR/$CURRENT_PACKAGE_NAME$CURRENT_PACKAGE_EXTENSION >> $ADM_DIR/packages/$CURRENT_PACKAGE_NAME 2> /dev/null
 else
  (cd $TARGET_DIR; gzip -cd | tar -xlpvf - ) < $PACKAGE_DIR/$CURRENT_PACKAGE_NAME$CURRENT_PACKAGE_EXTENSION >> $ADM_DIR/packages/$CURRENT_PACKAGE_NAME 2> /dev/null
 fi
 chmod 644 $ADM_DIR/packages/$CURRENT_PACKAGE_NAME
 if [ -f $TARGET_DIR/install/doinst.sh ]; then
  echo "Executing installation script for package $CURRENT_PACKAGE_NAME... "
  (cd $TARGET_DIR; sh $TARGET_DIR/install/doinst.sh -install; )
  cp $TARGET_DIR/install/doinst.sh $ADM_DIR/scripts/$CURRENT_PACKAGE_NAME
  chmod 755 $ADM_DIR/scripts/$CURRENT_PACKAGE_NAME
  # Clean up the mess...
  if [ -d $TARGET_DIR/install ]; then
   (cd $TARGET_DIR/install ; rm -r -f doin* 1> /dev/null 2>&1 )
   rmdir $TARGET_DIR/install 1> /dev/null 2>&1
  fi
 fi
 # Now we reload the shell hash table in case we've added something useful
 # to the command path:
 hash -r
 echo "Done installing package $CURRENT_PACKAGE_NAME."
}
install_disk() {
 mount_the_source $1
 if [ $? = 1 ]; then
  umount_the_source;
  return 1;
 fi
 CURRENT_DISK_NAME="$1"
 PACKAGE_DIR=$SOURCE_DIR
 if [ "$SOURCE_MOUNTED" = "always" -a ! "$DISK_SETS" = "disk" ]; then
   PACKAGE_DIR=$PACKAGE_DIR/$1
 fi
 touch $TMP/tagfile
 if [ ! "DISK_SETS" = "disk" ]; then
  if [ -r $PACKAGE_DIR/tagfile$CUSTOM ]; then
   cat $PACKAGE_DIR/tagfile$CUSTOM >> $TMP/tagfile
   chmod 600 $TMP/tagfile
  elif [ -r $PACKAGE_DIR/tagfile ]; then
   cat $PACKAGE_DIR/tagfile >> $TMP/tagfile
   chmod 600 $TMP/tagfile
  fi
 fi
 if [ "$1" = "single_disk" -o -r $PACKAGE_DIR/disk$1 ]; then
  CATALOG_FILE=`basename $PACKAGE_DIR/disk*`;
  if [ -r $PACKAGE_DIR/$CATALOG_FILE -a ! -d $PACKAGE_DIR/$CATALOG_FILE ]; then
   if fgrep CONTENTS: $PACKAGE_DIR/$CATALOG_FILE 1> /dev/null 2>&1 ; then
    # First we check for missing packages...
    for PKGTEST in `fgrep CONTENTS: $PACKAGE_DIR/$CATALOG_FILE | cut -b10-` ; do
     if [ ! -r $PACKAGE_DIR/$PKGTEST.tgz ]; then
      cat << EOF

WARNING!!!

While looking through your index file ($CATALOG_FILE), I noticed that you
might be missing a package ($PKGTEST.tgz) that is supposed to be on this
disk (disk $1). You may go on with the installation if you wish, but if this
is a crucial file I'm making no promises that your machine will boot.

Press [enter] to continue...
EOF
      read JUNK_INPUT;
     fi
    done # checking for missing packages
    # Now we test for extra packages
    ALLOWED="`fgrep CONTENTS: $PACKAGE_DIR/$CATALOG_FILE | cut -b10-`" 
    for PACKAGE_FILENAME in $PACKAGE_DIR/*.tgz; do
     BASE="`basename $PACKAGE_FILENAME .tgz`"
     if echo $ALLOWED | fgrep $BASE 1> /dev/null 2>&1 ; then
      GOOD="yup yup"
     else
      cat << EOF

WARNING!!!

While looking through your index file ($CATALOG_FILE), I noticed that you
have this extra package ($BASE.tgz) that I don't recongnize. Please be sure
this package is really supposed to be here, and is not left over from an old
version of Slackware. Sometimes this can happen at the archive sites.

Press [enter] to continue...

EOF
      read JUNK_INPUT;
     fi
    done 
   fi
   cat $PACKAGE_DIR/$CATALOG_FILE > $ADM_DIR/disk_contents/$CATALOG_FILE
   chmod 644 $ADM_DIR/disk_contents/$CATALOG_FILE
  fi
  for TEST_EXTENSION in .tgz .tar; do
   for PACKAGE_FILENAME in $PACKAGE_DIR/*$TEST_EXTENSION; do
    if [ "$PACKAGE_FILENAME" = "$PACKAGE_DIR/*$TEST_EXTENSION" ]; then
     continue;
    fi
    CURRENT_PACKAGE_NAME=`basename $PACKAGE_FILENAME $TEST_EXTENSION`
    CURRENT_PACKAGE_EXTENSION=$TEST_EXTENSION
    AddKey=""
    SkipKey=""
    if [ "$ASK" = "tagfiles" -a ! "$DISK_SETS" = "disk" ]; then
     if fgrep "$CURRENT_PACKAGE_NAME:" $TMP/tagfile | sed -n '$ p' | fgrep ADD > /dev/null 2> /dev/null ; then
      AddKey="ADD"
     fi
     if fgrep "$CURRENT_PACKAGE_NAME:" $TMP/tagfile | sed -n '$ p' | fgrep SKP > /dev/null 2> /dev/null ; then
      SkipKey="SKIP"
     fi
    elif [ "$ASK" = "never" ]; then
     AddKey="ADD"
    else # ASK must equal always
     ASK="always"
     fi  
    if [ ! "$DISK_SETS" = "disk" ]; then
     if fgrep "$CURRENT_PACKAGE_NAME:" $TMP/tagfile | sed -n '$ p' | fgrep ADD > /dev/null 2> /dev/null ; then
      PRIORITY="[required]"
     elif fgrep "$CURRENT_PACKAGE_NAME:" $TMP/tagfile | sed -n '$ p' | fgrep REC > /dev/null 2> /dev/null ; then
      PRIORITY="[recommended]"
     elif fgrep "$CURRENT_PACKAGE_NAME:" $TMP/tagfile | sed -n '$ p' | fgrep OPT > /dev/null 2> /dev/null ; then
      PRIORITY="[optional]"
     elif fgrep "$CURRENT_PACKAGE_NAME:" $TMP/tagfile | sed -n '$ p' | fgrep SKP > /dev/null 2> /dev/null ; then
      PRIORITY="[skip]"
     else
      PRIORITY="[unknown]"
     fi
    fi
    echo
    PACKAGE_SIZE=`filesize $PACKAGE_FILENAME`
    if [ "$AddKey" = "ADD" ]; then
     echo "Auto-installing package ==>$CURRENT_PACKAGE_NAME<==        Priority: $PRIORITY"
     # Print out the description text:
     BASE_DISK_NAME=`basename $PACKAGE_DIR/disk*`
     if [ -r $PACKAGE_DIR/$BASE_DISK_NAME -a ! -d $PACKAGE_DIR/$BASE_DISK_NAME ]; then
      fgrep "$CURRENT_PACKAGE_NAME:" $PACKAGE_DIR/disk* 2> /dev/null | uniq ;
     fi
     if [ "$CURRENT_PACKAGE_EXTENSION" = ".tgz" ]; then
      COMPBYTES="`gzip -l $PACKAGE_DIR/$CURRENT_PACKAGE_NAME.tgz | sed -n '$ p' | cut -b1-9`"
      UNCOMPBYTES="`gzip -l $PACKAGE_DIR/$CURRENT_PACKAGE_NAME.tgz | sed -n '$ p' | cut -b10-19`"
      COMPRESSED="`expr $COMPBYTES / 1024`K"
      UNCOMPRESSED="`expr $UNCOMPBYTES / 1024`K"
      echo "Size: Compressed: $COMPRESSED, uncompressed: $UNCOMPRESSED."
     else # uncompressed
      echo "Size: This tar archive will use `expr $PACKAGE_SIZE / 1024`K of drive space."
     fi
     install_the_current_package;
    elif [ "$SkipKey" != "SKIP" ]; then
     echo "Package Name: ==>$CURRENT_PACKAGE_NAME<==        Priority: $PRIORITY"
     if [ -r $PACKAGE_DIR/$BASE_DISK_NAME -a ! -d $PACKAGE_DIR/$BASE_DISK_NAME ]; then
      fgrep "$CURRENT_PACKAGE_NAME:" $PACKAGE_DIR/disk* 2> /dev/null | uniq ;
     fi
     if [ "$CURRENT_PACKAGE_EXTENSION" = ".tgz" ]; then
      COMPBYTES="`gzip -l $PACKAGE_DIR/$CURRENT_PACKAGE_NAME.tgz | sed -n '$ p' | cut -b1-9`"
      UNCOMPBYTES="`gzip -l $PACKAGE_DIR/$CURRENT_PACKAGE_NAME.tgz | sed -n '$ p' | cut -b10-19`"
      COMPRESSED="`expr $COMPBYTES / 1024`K"
      UNCOMPRESSED="`expr $UNCOMPBYTES / 1024`K"
      echo "Size: Compressed: $COMPRESSED, uncompressed: $UNCOMPRESSED."
     else # uncompressed
      echo "Size: This tar archive will use `expr $PACKAGE_SIZE / 1024`K of drive space."
     fi
     while [ 0 ]; do
      echo -n "Install package ==>$CURRENT_PACKAGE_NAME<== ([y]es, [n]o, [q]uit adding software)? "
      read REPLY;
      if [ "$REPLY" = "y" ]; then
       install_the_current_package;
       break;
      elif [ "$REPLY" = "n" ]; then
       break;
      elif [ "$REPLY" = "q" ]; then
       umount_the_source;
       chmod 755 $TARGET_DIR
       chmod 1777 $TARGET_DIR/tmp
       exit 1;
      fi
       echo
      echo "Not a valid choice."
      echo 
     done
    else
     echo "Auto-skipping package ==>$CURRENT_PACKAGE_NAME<==       Priority: $PRIORITY" 
     if [ -r $PACKAGE_DIR/$BASE_DISK_NAME -a ! -d $PACKAGE_DIR/$BASE_DISK_NAME ]; then
      fgrep "$CURRENT_PACKAGE_NAME:" $PACKAGE_DIR/disk* 2> /dev/null | uniq ;
     fi
     if [ "$CURRENT_PACKAGE_EXTENSION" = ".tar" ]; then
      echo "Size: This tar archive would have used `expr $PACKAGE_SIZE / 1024`K of drive space."
     else
      COMPBYTES="`gzip -l $PACKAGE_DIR/$CURRENT_PACKAGE_NAME.tgz | sed -n '$ p' | cut -b1-9`"
      UNCOMPBYTES="`gzip -l $PACKAGE_DIR/$CURRENT_PACKAGE_NAME.tgz | sed -n '$ p' | cut -b10-19`"
      COMPRESSED="`expr $COMPBYTES / 1024`K"
      UNCOMPRESSED="`expr $UNCOMPBYTES / 1024`K"
      echo "Size: Compressed: $COMPRESSED, uncompressed: $UNCOMPRESSED."
     fi
    fi
   done
  done
  OUTTAHERE="false"
  if [ -r $PACKAGE_DIR/install.end ]; then
   OUTTAHERE="true"
  fi
  umount_the_source;
  if [ "$OUTTAHERE" = "true" ]; then
   return 1;
  fi
 else
  umount_the_source;
  if [ ! "$SOURCE_MOUNTED" = "always" ]; then
   echo
   echo -n "Incorrect disk, insert disk $1 and hit [enter], or [s] to skip series: "
   read REPLY;
   if [ "$REPLY" = "s" ]; then
    return 1;
   else
    install_disk $1;
   fi
  else
   cat << EOF

Can't find a disk series $SERIES_NAME in the source directory.
Skipping it...

EOF
   return 1; 
  fi 
 fi;
}
install_disk_set() { # accepts one argument: the series name in lowercase.
 SERIES_NAME=$1
 CURRENT_DISK_NUMBER="1";
 while [ 0 ]; do
  install_disk $SERIES_NAME$CURRENT_DISK_NUMBER;
  if [ $? = 1 ]; then # install.end was found, or the user chose
        # to quit installing packages.
   return 0;
  fi
  CURRENT_DISK_NUMBER=`expr $CURRENT_DISK_NUMBER + 1`
 done;
}
if [ "$DISK_SETS" = "disk" ]; then
 install_disk single_disk;
 ASK="always"
else
 touch $TMP/tagfile
 chmod 600 $TMP/tagfile
 if echo $DISK_SETS | fgrep "#a#" 1> /dev/null 2>&1; then
  A_IS_NEEDED="true"
 else
  A_IS_NEEDED="false"
 fi
 while [ 0 ];
 do
  while [ 0 ]; # strip leading '#'s
  do
   if [ "`echo $DISK_SETS | cut -b1`" = "#" ]; then
    DISK_SETS="`echo $DISK_SETS | cut -b2-`"
   else
    break;
   fi
  done
  if [ "$A_IS_NEEDED" = "true" ]; then
   if [ "$TARGET_DIR" = "/" ]; then
    cat << EOF

*** WARNING!
  Reinstalling your A series from the running system is not
  a good idea. It is suggested that you use the bootdisk
  instead. You may:
  [a] - Abort software installation.
  [i] - Ignore this warning and reinstall the A series anyway.
        (at your own risk)!
  [s] - skip the A series, but continue installing software.

EOF
    echo -n "[a]bort, [i]gnore, or [s]kip? "
    read WHATDO;
    echo
    if [ "$WHATDO" = "a" ]; then
     echo "Aborting..."
     echo
     A_IS_NEEDED="false"
     DISK_SETS=""
     continue;
    elif [ "$WHATDO" = "s" ]; then
     echo "Skipping A series..."
     echo
     A_IS_NEEDED="false"
     continue;
    elif [ ! "$WHATDO" = "i" ]; then
     continue; # unknown response
    fi
   fi
   cat << EOF

--- Installing disk series ==>a<==
EOF
   install_disk_set a;
   A_IS_NEEDED="false"
  fi
  count="1"
  if [ "`echo $DISK_SETS | cut -b$count`" = "" ]; then
   break; # we be done here :^)
  else
   count="2"
   while [ 0 ]; do
    if [ "`echo $DISK_SETS | cut -b$count`" = "" -o "`echo $DISK_SETS | cut -b$count`" = "#" ]; then
     count="`expr $count - 1`"
     break;
    else
     count="`expr $count + 1`"
    fi
   done
  fi
  diskset="`echo $DISK_SETS | cut -b1-$count`"
  count="`expr $count + 1`"
  DISK_SETS="`echo $DISK_SETS | cut -b$count-`"
  if [ "$diskset" = "a" ]; then
   continue; # we expect this to be done elsewhere
  fi
  cat << EOF

--- Installing disk series ==>$diskset<==
EOF
  install_disk_set $diskset; 
 done
fi
if [ "$DISK_SETS" = "disk" -o "$CMD_START" = "true" ]; then
 if [ -r $TMP/tagfile ]; then
  rm $TMP/tagfile
 fi
fi
chmod 755 $TARGET_DIR
chmod 755 $TARGET_DIR/var
chmod 1777 $TMP